Portable Wireless Camera System With Infrared Night Vision Model: SH01 Please read this manual carefully und thoroughly before any attempt to operate this product and retain it for your future reference.

FIRST TIME USAGE 7-10 Charging the Camera and Receiver 7-8 EU Environmental Protection Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.

INTRODUCTION Thank you for purchasind this wireless camera kit. This product works at ISM-2.4GHz frequency band which could be legally used worldwide without permission. We feel confident that you will be pleased with the quality and features of this product.The camera features image sensor and a transmitting module to capture the image and transmit them wirelessly. The receiver features a receiving module to receive and display the camera image on a color (LCD) - liquid crystal display. Notice Notice: This product may cause interference with other wireless equipment that operates at 2.4 GHz...

Restrictions 1. DO NOT use this product to violate one's privacy. Monitoring one's activities without consent is illegal and this product is not designed and manufactured for such purpose; 2. DO NOT put this product near any medical equipment. Radio waves might potentially cause breakdown of electrical medical equipment. So this product should be placed at least 1 foot away from any heart pacemaker. Radio waves might potentially influence heart pacemaker and lead to respiratory disturbance. 3. DO NOT use this product for any illegal activities. We shall not be responsible for any consequences...

... v • satcon PRODUCT Package Contents This package comes with the following items. Please check whether they are all included in the packaging box, if one or some is missing, contact the retailer for replacement. 2) Weatherproof cover for camera (1x) 4) Lithium Battery for receiver (1x) 5) „Y" shaped charging cable for camera & receiver (1x) 7) Charging cable „open end"

Power Jack Power ON/OFF

FIRST TIME USAGE Charging the Camera and Receiver 1. Load a Li-battery to the battery compartment with its polarities matched. 2. Connect the camera/receiver with auto cigarette lighter by the "Y" shaped charging cable. Your camera and receiver are being charged. A full charge will take about 2.5 hours for camera and for receiver respectively. Note: For camera, you need to remove the cover before charging. 3. Die Kamera kann während des Ladevorgangs betrieben werden. Drücken Sie den An/Aus Knopf um die Kamera an- (bzw. aus)zuschalten. Dann können sie die Kamera benutzen. 4. The receiver can also...

. V; satcon Pressing POWER ON/OFF button momentarily can switch between reverse and non reverse image.. • If the battery is exhausted, please recharge it with the charging cable. • Always keep weatherproof cover fitted regardless of conditions. Using the Camera 1. Before using make sure the camera is fully charged. Press the camera Power ON/OFF button to power on your camera.

2. Mount hte Magnetic Camera on your tailgate, and then adjust it to a suitable angle 3. Watching the back view of the car via the LCD display. Hitch your ride. Note: einem The Velcro supplied for those customers who desire to attach the display to vehicle dashboard Night Vision The built-in Infra-red lights in camera provide night vision for low light conditions. The Infra-red lights will be automatically activated at night. The picture will turn to Black & White (monochrome) in Night Vision status. Built-in IR lights for about 15ft Night Vision Range

Actual transmission range may vary according to weather, location, interference or building construction All the specifications are subject to minor change without prior notice

satconTROUBLESHOOTING When you experience the operation problems, please check and try the following yourself before claimin that it is the defective product or consulting the experienced technician. Copyright & Imprint This Manual is the Property of Satconsystem. Excerpts, copies and/or changes require written authorization from Satconsystem. Satconsystem BriegelstraBe 14 97486 Konigsberg in Bayern Germany Tel: +49 9525 9818116 Fax: +49 9525 9818117 [email protected] www.satconsystem.de