105 ZX
2Pages

105 ZX Wood diameters of up to 13 cm Feed roller width 200 mm Basic weight approx. 440 kg 3-point rear mount (540 rpm). Recommended drive power: 13-29.5 kW (18-40 hp). PTO shaft with freewheel clutch. Body/hopper/discharge chute: Feed hopper with flap as per CE standards. Turning discharge chute with adjustable deflector (as per GS standards). Chipping chamber hood with sound insulation. Chipping unit: Power Control System Minutes counter Road lights as per StVZO Rotating beacon, yellow, LED, with support on feed hopper Electr. strobe beacon, 12 V yellow, LED, with support on feed hopper 8 01 insulation (6) Standard: round, galvanized, without sound – n 2 nt (7) Round, with exterior sound insulation tum eme Miscellaneous u a g (8) Special colour (RAL n til ra colours, various gloss grades) un ar ion y by vis onl e n r fer I Of – Discharge chute Chipping unit with safety circuit as per EN 13525. 2-blade chipping disk with freely adjustable blades that can be resharpened several times. Anvil can be used twice. Rope cutter at the chipping disk. Hydraulic feed: Separate hydraulic circuit. Feed rollers with hydraulic forced feeding and two separate hydraulic motors. Parallel-guided upper feed roller. Hydraulic adjustment of the chip sizes. Address/Dealer’s stamp www.schliesing.com Date Every order is placed with the knowledge and acceptance of the General Terms and Conditions of Sale of Schliesing Machinery GmbH (valid version attached or available at www.schliesing.com/Imprint) Subject to the technical modifications, omissions and errors at any time. Revision: 06/2

Folding feed hopper as per CE standards, min. depth of 1,500 mm PTO-driven wood chipper Hopper dims. (interior): width = 890 mm, height = 720 mm Electronic control Recommended drive power 13-29,5 kW (18-40 hp) The wood chipper is in line with the safety instructions of DIN-EN 13525 Chipping disk Ø 600 mm, 25 mm thick Closed blade system for a fast, safe and recise blade change Freely adjustable blade settings Hydraulic adjustment of the chip sizes Blades can be resharpened up to approx. 10 times for a long service life PTO shaft with freewheel clutch Lightweight, solid base frame Basis...