175 MX
2Pages

175 MX Wood diameters of up to 16 cm [F»H Feed roller width 240 mm Basic weight < 750 kg Engine and chassis: Options Water-cooled 3-cylinder Kubota-diesel engine, 16.1 kW (21.9 hp). Power Control System with minutes counter. Industrial freewheel clutch. Single-axle chassis (80 km/h), fully galvanized. Hitch with overrun brake and ball coupling. Front jockey wheel, rear supporting leg. Road lights as per StVZO (protected against shocks). Pneumatic tyres 165/70 R13. TUEV expertise and ABE. Body/hopper/discharge chute: Feed hopper with flap in accordance with CE standards. Turning discharge chute with adjustable deflector flap (as per GS standard). Chipping unit and discharge chute sound-insulated. Chipping unit: Chipping unit with safety circuit as per EN 13525. 2-blade chipping disk with infinitely adjustable blades that can be resharpened several times. Closed blade system. Anvil and vertical blade can be used twice each. Rope cutter for chipping disk. Hydraulic feed: Separate hydraulic circuit. PowerGrip feed rollers with hydraulic forced feeding and two individual hydraulic motors. Parallel-guided upper feed roller. Hydraulic adjustment of Hydraulically adjustable chip sizes. Drive/engine □ (1) Power Control System incl. minutes counter □ (2) Battery master switch Chassis/body □ (3) Chassis conversion to 100 km/h □ (4) Spare tyre (separate, without holder) □ (5) Rotating beacon, yellow, LED, with support on feed hopper □ (6) Electr. strobe beacon, 12 V yellow, LED, with support on feed hopper □ (7) Protective grilles for rear lights (enclosed, assembly prepared) □ (8) Anti-theft device for ball coupling Discharge chute □ (9) Standard: narrow, with external sound insulation Chipping unit □ (10) WhisperCut® chipping system*-with standard discharge chute only Miscellaneous □ (11) Special colour (RAL colours, various gloss grades) □ (12) One-day registration (Exports only) □ (13) TUEV expertise / ABE □ (14) Safety circuit (SAFEchip) □ (15) Functional spiral cable with 13 pol plugs on both sides ‘Resulting in a higher total weight of approx. 800 kg Address/Dealer’s stamp sdiliesing®www.schliesing.com Every order is placed with the knowledge and acceptance of the General Terms and Conditions of Sale of Schliesing Machinery GmbH (valid version attached or available at www.schliesing.com/Imprint) Subject to the technical modifications, omissions and errors at any time. Revisio

The wood chipper is in line with the safety instructions of DIN-EN 13525 0 Folding feed hopper as per CE standards, min. depth of 1,500 mm 0 Hopper dims. (interior): width = 890 mm, height = 720 mm □ Chipping disk 0 660 mm, 30 mm thick 0 Closed blade system for a fast, safe and precise blade change 0 Freely adjustable blade settings 0 Hydraulic adjustment of the chip sizes 0 Blades can be resharpened up to approx. 10 times for a long service life 0 Anvil and vertical blade can be used twice each for a long service life 0 Excellent rope cutter at the main bearing of the chipping disk 0...