235 MXRS
2Pages

235 MXRS Diameters of up to 19 cm Feed width 240 mm Base weight ca. 1,600 kg OPTIONS Wood chipper on fixed rubber track chassis Engine and chassis: 235 MXRS Stage V: Water-cooled 4-cyl. diesel engine with 18.5 kW / 25.2 hp. Industrial freewheel clutch. High-quality professional track chassis with extra wide tracks (230 mm). Total track width: 1.200 mm. Speeds: 2.0 km/h or 3.6 km/h. Sturdy, two-lever control. Body/hopper/discharge chute: Feed hopper with fully galvanized folding feed hopper table. Discharge chute on ball bearing flange, turning and with adjustable deviation flap. Chipper unit and discharge with sound insulation. Two Emergency Stop buttons each on top of the feed hopper and on the left and right-hand sides of the feed hopper flap. Chipping unit: Chipping unit with safety circuit as per EN 13525. 2-blade cutter disk with freely adjustable knives that can be resharpened several times. Closed knife system. Horizontal and vertical anvils can be used twice each. Rope cutter at the cutter disk. (1) Power Control System (2) WhisperCut chipping system (incl. pos. 4) (3) Standard discharge chute, short, folding (4) Interior sound insulation of short discharge chute (-2 dBA) (5) WhisperCut discharge chute, short, folding (6) Horizontal standard discharge chute extension* (7) Vertical standard discharge chute extension* (8) Electric winch 2t, 15m (9) Transport hooks, 4x 2t (10) SAFEchip safety device (11) Extra SAFEchip transponder (12) Main battery switch (13) Yellow rotating beacon (14) Electric flashing beacon (15) Safety sliding stick 1.30 m (16) Special painting (17) Locking filler cap (18) Warranty extension for an additional year (19) Custom's documents All prices plus VAT (where applicable) – Prices effective 01.03.2021 *WhisperCut discharge chutes cannot be individually extended Individual discharge chute extension in one direction to a max. of 500 mm only Hydraulic feed: Feed control via separate hydraulic circuit. PowerGrip feed roller with hydraulic feeding. One hydraulic motor each per feed roller.Parallel-guided upper feed roller. Hydraulic adjustment of the feed roller speed and thus of the chip lengths. Level indicator for the hydraulic oil tank. Every order is placed with the knowledge and acceptance of the General Terms and Conditions of Sale of Schliesing Machinery GmbH (valid version attached or available at www.schliesing.com/Imprint) Subject to technical modifications, omissions and errors at any time.

This wood chipper is in compliance with the safety instructions of DIN 13525 Our diesel engines meet all Stage V required exhaust emission standards Folding feed hopper table, feeding depth min. 1,500 mm 235 MXRS Stage V: Water-cooled, 4-cyl. Kubota diesel engine with 18.5 kW / 25.2 hp Fully galvanized, corrosion-resistant folding feed hopper flap Industrial freewheel clutch, automatically acting between the engine and the cutter disk; less strain on the engine, bearings and shaft Two Emergency Stop buttons each on top of the feed hopper and on the left and righthand sides of the feed...