The Schulte FLEX ARM allows the operator to travel on the road while his Schulte 10’ or 15’ rotary cutter cuts the ditch slope. This new generation FLEX ARM can accommodate either 10’ or 15’ ex wing mowers. The tractor does not ride on the ditch slope reducing the risk of roll-overs. As an added bonus, wear and tear on the tractor is greatly reduced. Operators who have had a chance to use the Schulte FLEX ARM all agree that increased comfort and safety are its best features. Visibility is improved. The operator is in a better position to react to obstacles before the rotary cutter reaches them. The FLEX ARM makes it possible to use the rotary cutter in wetter conditions than normal since the tractor does not have to ride in the sloped ditch. No need to unhook! The FLX-1510 can tow directly behind the tractor. Shown with XH1000 Series 3

Features The Schulte FLX-1510 FLEX ARM has a number of unique features The FLEX ARM is not just a simple hitch frame. It attaches to the rotary cutter by means of a hitch tongue and strut so the rotary cutter does not pivot in relation to the arm. This feature allows the rotary cutter and FLEX ARM to be handled as one unit. Maneuverability, especially when backing up is much better than comp etitive machines. A parallel link system ensures that the front hitch section is always parallel to the rotary cutter allowing for tight turns both in working and in transport positions. The Schulte FLEX...

Features The FLX-1510 FLEX ARM is the second generation of Schulte’s patented design. It improves on the original FLEX ARM in a number of ways: The rotary cutter is now brought directly in line with the tractor for road transport. Swivel gearbox sets are now used so that power delivery is equally smooth in all positions of the FLEX ARM. The FLEX ARM can be smoothly extended or retracted under full power. The FLEX ARM comes complete with all components necessary to congure it for operation with a 10’ or 15’ rotary cutter. The second generation FLX-1510 FLEX ARM offers increased safety, operator...

FLX-1510 Specications SPECIFICATIONS - Heavy duty 11L x 15, 12 ply tires with a load capacity of 4000 lbs. - Cut directly in-line with the tractor or at any offset distance up to 122” (10.16ft) - Large 2-1/2” castor pivot shaft - Bolt-in replaceable axles - Spring steel tension bushings and induction hardened pins at major pivot points - Minimum of three (3) hydraulic circuits required to operate the FLEX ARM with a 15’ or 10’ mower - If independent wing lift is required on a 15’ mower then four (4) hydraulic circuits or the optional selector valve kit is required - Heavy duty 3-1/2 X 36 welded...