1. Catalogs
  2. Schulte Industries
  3. FRONT MOUNT FRAMES
video corpo

FRONT MOUNT FRAMES

FRONT MOUNT FRAMES

FRONT MOUNT FRAMES

Product catalog summary
Overview
The FM-350 and FM-115 are front mount frames designed for mounting snow blowers or SV Plows on the front of tractors, enhancing visibility and ergonomics compared to rear mounting. This setup allows for more efficient snow removal while driving forward, utilizing the tractor's forward gears for better performance and reduced wear on the clutch.

Features
- Quick attachment and removal from tractors.
- Compatible with Schulte SDX and RDX snow blowers and SV Folding V Plows.
- Driveline capable of transferring up to 250hp.
- Fully shielded driveline for safety.
- Adjustable to fit various tractor sizes and tire configurations.
- Telescoping frame and driveline components accommodate tractors from 151” to 211” (FM-350) and 111” to 164” (FM-115).
- Up to three banks of hydraulic lines can be routed to the front.

Specifications
FM-350
- Maximum tractor horsepower: 250hp (184kw).
- PTO: 1000 RPM for SDX-117 & RDX-117; 540 or 1000 RPM for SDX-102, RDX-102 & SDX-840.
- Lift capacity: 5000lbs (2268kg).
- Adjustability: Fits tractors 151” to 211”.
- Ground clearance: 13” (33cm), 3” higher without drivetrain.
- Lift range: 18” (45.7cm).
- Weight: 1650lbs (748kg) with drivetrain, 1250lbs (567kg) without.

FM-115
- Minimum tractor horsepower: 55hp (41kw) for SDX-840, 85hp (63kw) for SDX-102, RDX-102.
- Maximum tractor horsepower: 115hp (86kw).
- Hydraulic requirement: 3 remote circuits, 10GPM at 1200PSI.
- PTO: 540rpm.
- Lift capacity: 5000lbs (2268kg).
- Adjustability: Fits tractors 111.5” to 164.5”.
- Ground clearance: 10” (25cm), 3” higher without drivetrain.
- Lift range: 18” (45.7cm).
- Weight: 1400lbs (636kg).

Additional Information
Schulte Industries Ltd. reserves the right to change product designs and specifications without notice. The document includes optional equipment and accessories that may not be standard.
See more

Catalog excerpts

FRONT MOUNT FRAMES-1

World Class Built to Last

 Open the catalog to page 1
FRONT MOUNT FRAMES-2

Quick Attach Frame for Snow Blowers No matter how much snow you need to move, you will appreciate the FM-350 and FM-115. The Front Mount Frames give you the ability to mount your 3pt snow blower or SV Plow on the front of your tractor instead of on the tractor’s rear 3pt hitch. The FM-350 and FM-115 offer you better visibility and ergonomics when coupled with a Schulte snow blower. Blowing snow, while driving forward, is more efficient than blowing snow in reverse. The FM-350 and FM-115 allow you an increased selection of travel speeds as your tractor has many more forward gears than reverse...

 Open the catalog to page 2
FRONT MOUNT FRAMES-3

Enjoy the convenience, comfort and improved performance The Schulte FM-350 and FM-115 are designed for simple and quick tractor mounting and removal. Once mounted to the tractor all pushing force is transmitted to the snow blower through the tractor drawbar. Tension screws at the rear drawbar ensure that the tractor sees only vertical load at the frame mounting points. Rear Hitch or Optional Drivetrain - FM-350 Rear Hitch or Optional Drivetrain - FM-115 The FM-350 and FM-115 are a perfect match for Schulte SDX or RDX snow blowers and the SV-10, SV-12 and SV-14 Folding V Plows. The driveline is...

 Open the catalog to page 3
FRONT MOUNT FRAMES-4

Specifications No matter how much snow you need to move you will appreciate the FM-350 and FM-115. The Front Mount Frames give you the ability to mount your 3pt snow blower or SV Plow on the front of your tractor instead of on the tractor’s rear 3pt hitch. Tractor horsepower, maximum Tractor PTO Lift capacity Adjustability Nominal ground clearance Nominal lift range Weight Tractor horsepower, minimum Tractor horsepower, maximum Tractor Hydraulic Requirement Tractor PTO Lift capacity Adjustability Nominal ground clearance Nominal lift range Weight Front mount & PTO power FM-350 250hp (184kw) SDX-117...

 Open the catalog to page 4

All Schulte Industries catalogs and technical brochures

  1. SNOW REMOVAL

    8  Pages

  2. FM-350

    2  Pages

  3. SV10-12-14

    2  Pages

  4. SBX-75

    2  Pages

  5. FX-530

    4  Pages

  6. Titan 5000

    2  Pages

  7. 5026 Brochure

    2  Pages

  8. FX-742

    4  Pages

Archived catalogs

  1. FM Series

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.