RDX-102 Snow Blower
2Pages

RDX-102 Series Specifications SPECIFICATIONS Cutting Width Tractor Horsepower Cutting Height Overall Height Auger Diameter Fan Diameter Fan Type Fan Shaft Diameter Auger Drive Chain Weight Adjust. Double Linked Chute Deflector Hydraulic Chute Rotation Mechanism Replaceable Blade Adjustable Replaceable Skid Shoes Hitch Size PTO Speed Capacity - Dry snow / Wet Snow Snow Blower Side eject - left side Side eject - right side Rotation angles of 25° to left, through center chute or 52° to right RDX- 102 OPTIONS 1. Heavy duty power shaft - size 8 2. Heavy duty chute kit with cylinder kit 3. Truck loading chute kit with cylinder kit 4. 3pt extension kit 5. Gauge wheel kit 6. 1000rpm gearbox & drive shaft option Lift capacity Accommodates tractors between 151” and 211” measured from front mount plate to drawbar pin Average ground clearance 13” depending on tractor installation Average lift range A perfect combination for Schulte’s model RDX-102 is the FM-300 front mount 3pt hitch frame. Tractor horsepower, maximum 1 102” wide cut and efficient twin stage design are ideally suited to 85-140 HP tractors. 2 The RDX-102 rotating drum allows snow to be ejected out left or right side or through center chute. 3 In heavy wet snow, blowing capacity of the RDX-102 is greatly increased due to the fact the snow can be discharged directly off the fan paddles versus all the way up through the center chute. 4 Highly efficient 30” - four paddle fan with an open center and cupped blades results in improved throwing distance 5 A Heavily reinforced auger feeds snow to the fan and ensures that chunks of ice and hard packed snow are broken up before being discharged. 6 A replaceable cutting blade and replaceable adjustable skid shoes are standard on all models. 7 A heavy duty gearbox with 1 5/8” splined shafts provides positive power delivery to the fan. 8 UHMW bearing and bronze bushings in the rollers allow for reduced freeze-up on chute. 9 Enclosed chain case protects the drive chain from debris Schulte Industries Ltd. P Box 70, Englefeld, Saskatchewan, Canada S0K 1N0 .O. Tel: (306) 287-3715 Fax: (306) 287-3355 E-Mail: info@schulte.ca Visit our Web site at: www.schulte.ca 10 Shear bolt protection for the fan and cross auger. PREPARED by NELSON GRAPHIC DESIGN Schulte is a registered trademark of Alamo Group Inc. Schulte Industries Ltd. reserves the right to change the design, specification of it’s products without notice. Illustrations may include optional equipment and accessories, and may not include all standard equipment.

A Patent pending drum rotation cylinder (2.5”x 20”) rotates fan housing to eject snow out the left or right side or through the center chute. (Circular arrows show cylinder movement) The heart of the these Snow Blowers is the 4 paddle open center, cupped blade design fan that concentrates snow to the center & back of the fan resulting in improved performance. A 23” open auger design with formed struts includes more braces in the center for increased strength and durability. This type of design cuts into hard packed snow & feeds the fan with ease. The double chute deflector with a standard...