Snow Blower Rotation angles of 25° to left, through center chute or 52° to right A hydraulically operated rotating fan housing allows snow to be ejected out the left or right side of the fan housing. Delivering snow directly off the fan blades and out aids in moving heavy wet snow and is more efficient when using in open areas. The center chute can be used to cast snow directionally as needed in confined areas. The Schulte’s RDX-117 incorporates a 38” Five paddle open center cupped style fan which improves performance and is larger than most competitive designs on the market. A 1000 RPM gear driven drive system is standard. The fan is held in place by a 2” tapered splined shaft. A size 8 Bondioli power shaft is included with shear pin protection to power the blower. A Bondioli Italian made one piece gearbox drives this unit. A heavily reinforced 23” bottom auger with formed struts ensures that hard chunks of snow and ice are fed into the fan with ease. This large open bottom auger also allows the snow blower to cut into hard pack snow where other snow blowers have difficulty. A 300° rotating chute design includes a UHMW bearing area to reduce freeze up of the chute. The new double deflector design reduces blowback when the chute deflector is placed in the down position. A hydraulic cylinder for adjusting the chute deflector is standard. Shear bolt protection for the fan & cross auger.

117" Wide 38" Five paddle Fan Snow Throwing Performance A Patent pending drum rotation cylinder (3”x 24”) rotates fan housing to eject snow out the left or right side or through the center chute (Circular arrows show cylinder movement) The RDX-117 drum is made of Hardox 450 which has a hardness of 450 BHN or 48 Rockwell C. This drum is very hard and is very resistant to abrasion from rocks, gravel and other debris. It will provide a long and trouble free service life. The RDX-117 Rotating drum allows snow to be ejected out left or right side or through center chute. A double chute deflector is...

The heart of the these Snow Blowers is the 5 paddle open center, cupped blade design fan that concentrates snow to the center & back of the fan resulting in improved performance. Open auger design with formed struts. The RDX-117 use a 23” bottom auger & 14” top auger. This type of design cuts into hard packed snow & feeds the fan with ease. A double chute deflector with a standard 2” x 6” cylinder reduces blow back considerably in comparison to single deflectors. A gear driven 300 degree hydraulic chute rotator comes standard with a 7.3 cubic inch hydraulic motor. High grade steel bolt in replaceable...

RDX-117 Series Specifications SPECIFICATIONS Cutting Width 117” (2.97 m) Tractor Horsepower 140 - 220 HP (104 - 164 KW) Cutting Height 45 1/2” (1.15 m) Overall Height 100” (2.54 m) (With HD Chute) Auger Diameter - Bottom 23” (58.4 cm) Auger Diameter - Top 14” (35.5 cm) Fan Diameter 38” (96.5 cm) Fan Type 5 paddle Fan Shaft Diameter 2” (5.1cm) Auger Drive Chain #80 Weight 3085lbs (1400kg) Adjust. Double Linked Chute Deflector Standard Hydraulic Chute Rotation Mechanism Standard Replaceable Blade Standard Adjustable Replaceable Skid Shoes Standard Hitch Size Cat II & Cat III 3pt and quick hitch...