SDX-117 Snow Blower
4Pages

Snow Blower 1 Schulte’s SDX-117 incorporates a 38” Five paddle open center cupped style fan which improves performance and is larger than most competitive designs on the market. 2 On the SDX-117, a 1000 RPM gear driven drive system is standard. The fan is held in place by a 2” tapered splined shaft. A size 8 Bondioli power shaft is included with shear pin protection to power the blower. 3 A Bondioli Italian made 1 piece gearbox drives this unit. 4 A heavily reinforced 23” bottom auger with formed struts ensures that hard chunks of snow and ice are fed into the fan with ease. This large open bottom auger also allows the snow blower to cut into hard pack snow where other snow blowers have difficulty. 5 A 300 degree rotating chute design includes a UHMW bearing area to reduce freeze up of the chute. The new double deflector design reduces blowback when the chute deflector is placed in the down position. 6 Optional gauge wheels with tapered roller bearings are available for highway or pavement use only. 7 A hydraulic cylinder for adjusting the chute deflector is standard. 8 3 Position adjustable stake arms. 9 Enclosed chain case protects the drive chain from debris. 10 Shear bolt protection for the fan & cross auger.

Features 117” Wide, 38” Five paddle Fan Snow Throwing Performance The 38” five paddle fan has a unique open centre, cupped blade design that centrates the snow to the centre of the fan for more efficient snowblowing. The large 23” bottom auger ensures that the fan is fed correctly and enables the snow blower to break into hard packed snow with greater ease. The chute rotator is driven by a gear-on-gear system with a hydraulic motor to eliminate cables. The chute will rotate a full 300°. A double chute deflector is standard and considerably reduces blow back of snow in comparison to single...

The heart of the these Snow Blowers is the 5 Open auger design with formed struts. The paddle open center, cupped blade design SDX-117 use a 23" bottom auger & 14" top fan that concentrates snow to the auger. This type of design cuts into hard center & back of the fan resulting in packed snow & feeds the improved performance. fan with ease. A gear driven 300 degree hydraulic High grade steel bolt in replaceable chute rotator comes standard with a 7.3 cutting blade is standard and gives many cubic inch hydraulic motor. years of trouble free cutting performance. Adjustable replaceable skid...

Cutting Width 117” (2.97m) Tractor Horsepower 140 - 220 HP (104 - 164 KW) Cutting Height 45 1/2” (1.15m) Overall Height 100” (2.54m) (With HD Chute) Auger Diameter - Bottom 23” (58.4 cm) Auger Diameter - Top 14” (35.5 cm) Fan Diameter 38” (96.5cm) Fan Type 5 paddle Fan Shaft Diameter 2” (5.1cm) Auger Drive Chain #80 Weight 2750lbs (1247kg) Adjust. Double Linked Chute Deflector Standard Hydraulic Chute Rotation MechanismStandard Replaceable Blade Standard Adjustable Replaceable Skid Shoes Standard Hitch Size Cat II & Cat III 3pt and quick hitch PTO Speed 1000 RPM Capacity - Dry Snow / Wet...