UNIFEED DIVISION Your specialist in cattle feeding Quality and Technology without compromise

in attesa in alta risoluzione The one-auger Chopping-Mixing Wagons of the BUFFALO V1 series, being manufactured in 7-9-11 m 3 capacity versions, represents the best solution for the preparation of the Unifeed ration in all those farms with low passages thanks to their especially reduced height (30 cm lower then the standard traditional machines). These machines, with their efficiency and high reliability, fully satisfy the needs of small and medium farms, granting excellent working performances. Round bales of forage or grass silage are very easily treated providing an accurate and homogeneous...

The standard equipment • Lowered series (not containerizable) • N° 1 vertical chopping-mixing auger fitted with toothed blades • Left direct discharge placed on the bend • Hydraulic couplings to the tractor, without distributor • Epicycloidal gearbox with two speed gear • High strength steel frame • Single axle unit with single wheels, weighing sensors, no brakes • Product containment ring flush mixing box • Universal and adjustable drawbar for coupling to any type of tractor with 0 45 mm towing eye • N° 2 manually operated counter-blades • Mechanical supporting foot • Inspection ladder • Sekotronic...

BUFFALO V2/VML Series BUFFALO V2/VMF Series The two-augers Chopping-Mixing Wagons of the BUFFALO V2 series, being manufactured in 12-14-16-20 m3 capacity versions, thanks to the very low frame assure the loading operation easier, such as their maneuvering around the farm, maintaining at the same time an high loading capacity. Simple, practical and reliable, these machines are suitable for the preparation of any type of ration: from dry ration for milk cows to the one with wet products for fattening cattle. High performance and high quality stand out, ensuring technological excellence in the preparation...

UNIFEED DIVISION The new technical concepts applied on BUFFALO machines represent the evolution of existing machines extremely reliable used by millions of livestock farmers all over the world. These high-performing machines, with important technical features and original solutions for all operating parts, are designed to guarantee maximum throughput and low running costs. All structural components are built with thick high-strength steel, making the machines extremely solid and robust for a long life. Epycicloidal gearbox with two-speed gear and high torque for lower power absorption and higher...

BUFFALO V2/VML Series BUFFALO V2/VMF Series The standard equipment • Lowered series (not containerizable) • N° 2 vertical chopping-mixing augers fitted with toothed blades • VML Series = Direct discharge placed on the left rear side • VMF Series = Rubber front bilateral conveyor (chain on request) 900x2200 mm (WxL)for 12-14-16 m3 900x2400 mm (WxL) for 20 m3 • Hydraulic couplings to the tractor with bowden cables distributor • Epicycloidal gearbox with two speed gear • High strength steel frame • Single axle unit with twin wheels for 12-14-16 m3, single wheels for 20 m3, weighing sensors, no brakes...

Wide frontal discharge system through a rubber or chain conveyor for an uniform and fast distribution. Frame welded on the bottom body granting stability and rigidity to the chopping-mixing box and to avoid distortions to the weighing system.

SEKO SpA Via Gorizia, 90 - 35010 Curtarolo (Padova) - Italy I Tel. +39 049 9699888 - Fax +39 049 9620403 I [email protected] - www.sekospa.com