Installation and User Manual FluoMini Chlorophyll Fluorescence Sendot research

SentiM research 1. General 1.1. Product Product: FluoMini Chlorophyll Fluorescence Sensor Version: version 2 Software version: 10 Fiber probe version Measurment unit Fiber Probe Leaf Clip 1.2 Terms and Conditions The Sendot research General Terms and Conditions and Payment Conditions are applicable to this instrument. These Terms and Conditions are registered under nr. 62488295 at KvK Haaglanden, The Netherlands

Semin research 1.3 Warranty The mechanics and electronics of this product are warranted for two years. 1.4 Application This sensor is suitable for measurements on plant material, seeds and other plant material. 2. Specificaties Specifications Measuring range Temperature operation range Accuracy CF at > 0 < 1 mg/g Accuracy CF at > 1 < 5 mg/g Accuracy CF at > 5 < 20 mg/g Drift / Stability Sample time Connectivity Output signal Dimensions (l*b*h in mm) Weight (g) Housing material Electrical connections Protection class Supply Voltage 3. Installation 3.1 Mounting The sensor can be placed in an optional...

3.4 Pressure sensor NA 3.2 Software The PC software is a simple executable file which does not need to be installed. It is compatible from windows 7 and up. The software can store measurement results in a predetermined directory on the hard disk. An experimental App is available for Android. 4. Measuring with the Fluomini chlorophyll sensor 4.1 Values The FluoMini Chlorophyll Fluorescence sensor is able to measure chlorophyll fluorescence by means of a fiber optic probe. The measured intensity is dependent on a number of variables apart from the concentration chlorophyll e.g. the distance between...

The field left-top is the <status field> giving extra info. The <Start> button starts the measurements. When clicked it changes appearance to a <Stop> button to stop the measurments. Results are stored in a file with a name containing the text typed into the <Extra File identifier> field (First stop the program before changing that field). The button <Graph> causes the graph to appear in the <Graph field> . With the option field below the graph the parameter to be displayed can be chosen. If for some reason no connection is made between the sensor and the computer or tablet, the <Status Field>...

Some relevant parameters showing the internal PCB temperature and the net-signal with its LED dimvalue

A choice can be made to store every single, every 10th or every 50th measurment Time interval setting (approx seconds), Exact time stamp (computer time) is stored too Sensitivity setting. High sensitivity gives lowest range and highest sensitivity for low concentrations of chlorophyll, Low sensitivity gives highest range and lowest LED intensity for measurements.

Adapt slope and offset of internal calibration line to adapt the sensor to specific situations.

Adres Sendot research BV Veilingweg 44 3981 PC Bunnik Nederland Telefoon +31 (0)30-636 84 77 E-mail [email protected]