Short facts: • Brass housing, suitable for oxygen applications M VO- M 7- S C 00 1-002 EN Versi on: 1.0 S tatus: rel eased, subj ect to al terati ons • Normally open • 0,2 to 7 bar operating pressure • Ideal aeration system using oxygen Regulating the oxygen concentration - with the Solenoid Valve M7. Technical information Dimensions The SENECT Solenoid Valve Oxygen M7 is used for the installation in oxygenation systems. Material (valve) brass / stainless steel, seal FKM G1/8“ inner thread / 6 mm hoses It´s „normally open“ configuration allows a continuous oxygen supply, even if there is a power-shortage or black out. Temperature range Power consumption The valve is delivered specially cleaned and including two hoses. If desired, the valve can be delivered mountet to the Flow regulator DY112. Cable length with all SENECT control units Ingress protection

M VO- M 7- S C 00 1-002 EN Versi on: 1.0 S tatus: rel eased, subj ect to al terati ons G 1/8“ inner thread 6 hose Flow direction (marked by the arrow on the bottom) Solenoid Valve Oxygen M7 Valve incl. 5 m cable, manual