*myagriexpo

C-S50JCK-10815

Product catalog summary

Standard Dimensions:
The C-S50JCK-10815 series joystick is a medium-sized joystick incorporating an imported potentiometer. It features a 1-dimensional coordinate adjustment with a spring return to the Y-end.

Selection Guide:
The joystick can be configured with 1 or 2 potentiometers and includes options for a dust-proof rubber cover and different knob types. The series code 10815A includes a C203 knob, while 10815B includes a C201 knob with a 3m shielded wire.

General Specifications:
The measuring point is 115 mm from the mounting panel. The joystick offers various electrical specifications for potentiometers and switches, including a dielectric strength of 1000V.A.C. and insulation resistance greater than 1000MΩ at 500V.D.C.

Electrical Specifications:
The potentiometer has a power rating of 0.13W, with a standard resistance value of 10K±15% and an independent linearity tolerance of ±3%. The switch specifications include a rating of 50V.D.C. / 0.1A and a center tap angle of approximately 3º.

Mechanical and Environmental Specifications:
The joystick has a mechanical life expectancy of approximately 5,000,000 operations, with an operating force of about 3N to 15N and an operating angle of approximately ±40° to ±50°. It is rated IP54 for protection above the panel and can operate in temperatures ranging from -20℃ to +65℃.

Additional Features:
Optional features include other output signals such as CAN OPEN, USB, RS-485, and wireless remote control. Customized grip knobs are available upon request.

Catalog excerpts

标准尺寸 / Standard Dimensions Abt. 40°~50° 导线固定处 Wire fixing point 护套屏蔽线，长约3米 Shielded wire length abt.3m ◆ 中等尺寸操纵杆、采用进口电位器 Medium-sized joystick, imported potentiometer incorporated ◆ 单轴调节型， 1-dimensional coordinate ◆ 单边复位 Spring return to Y-end 选型指导 / Selection Guide C-S50JCK - X 操纵杆带精密导电塑料电位器 Joystick with precision conductive plastic potentiometer - 10815A 10815A 序列号，带C203把手 / Series code, with C203 knob 10815B 序列号，带C201把手，电位器上焊3m屏蔽线 / Series code, with C201 knob and the potentiometer is welded with 3m shielded wire X 单轴型 1-dimensional coordinate type G 带防尘罩橡皮罩 / With dust proof rubber c

Open the catalog to page 1

一般性能 / General Specifications 操作角度 Operating angle 操作压力（注） Operating force（note）预期机械寿命 Life expectancy 工作温度 Operating temperature 储存温度 Storage temperature 防护等级 Protection degree IP54 (面板以上 Above panel）注：测力点距离安装面板高度为115mm。Note:The measuring point is 115 mm away from the sub-panel for mounting. 电气性能（电位器） / Electrical Specifications (Potentiometer) 阻值 Standard resistance value 独立线性公差 Independent linearity tolerance 输出平滑 Output smoothness <输入电压 Against input voltage 0.2% 触点电阻变异 Contact resistance variation 介质耐压 Dielectric strength 绝缘电阻 Insulation resistance 中心抽头角度 Center tap angle 通过电刷最大电流 Wiper...

Open the catalog to page 2

C-S50JCK-10815

C-S50JCK-10815

Catalog excerpts

All SENTOP by Shanghai Sibo M&E Co., Ltd. catalogs and technical brochures