*myagriexpo

JH25

Product catalog summary

Overview: The document provides technical specifications and details for the JH25 Series Hall Effect Joystick, manufactured by Shanghai Sibo M & E Co., Ltd. It includes information on dimensions, output characteristics, mounting methods, and general specifications.

Standard Dimensions: The joystick features a compact design with specific dimensions for installation. It includes a lead wire of AWG24 with a length of approximately 300mm.

Key Features:

Miniature thumbstick design.
Available with redundant output for enhanced reliability.
Electrical parts are rated at IP67 for protection against dust and water.

Selection Guide: The joystick offers various configurations based on output characteristics, input voltage, and operating methods. Options include:

1D or 2D coordinate operation.
Different input voltage and output signal combinations.
Special output signals and operating methods.

Mounting Methods: Two primary mounting methods are described:

Rear mount bezel (Method A).
Drop-in bezel (Method B).

Both methods use tapping screws for installation.

General Specifications:

Operating voltage: 5V±10% or 9~30V.
Output signal: 0~100%Vcc, 10~90%Vcc, 0~5V, or 0.5~4.5V.
Mechanical life expectancy: Approximately 500,000 cycles.
Operating temperature range: -20℃ to +85℃.
Protection grade: IP67 for electrical parts.

Electrical Specifications:

Insulation resistance: >1000MΩ at 500V.D.C.
Dielectric strength: 500V.A.C. for 1 minute.
Current consumption: <11mA per axis for 5V input, <15mA per axis for 9~30V input.

Special Specifications Available: Customizations include special analog signals, knobs, and connectors. Protection modules and other customer-specific requirements can be accommodated.

Additional Notes: The document emphasizes the possibility of changes in specifications to improve product quality and design. Customers are advised to consult with SIBO for special requirements or changes in specifications.

Catalog excerpts

JH25 系列霍尔操纵杆 JH25 Series Hall effect Joystick 标准尺寸 / Standard Dimensions ◆ 拇指操纵杆 Miniature thumbstick ◆ 可实现冗余输出 Available redundant output ◆ 防护等级(电气部分) IP67 (Electrical parts) IP67 选型指导 / Selection Guide JH25 - 2 O - 1 拇指操作型霍尔操纵杆25尺寸 JH25 Hall effect miniature thumbstick 1 - 0000 特殊编号：用于特殊的客户需求 Special 4-digit part number: For customized products 1 单轴操作 / 1-dimensional coordinate type 2 双轴操作 / 2-dimensionals coordinate type I "前后"型操作 / I figure directional operation O 全方位型操作 / Omni-directional 360° operation S 特殊操作方式 / Special operating method 1 带防尘罩 / With rubber cover 输出特性 / Output characteristics 1 输出曲线 (直线，无中位保持) Output characteristic, figure 1 (Straight line without central position hold) S 特殊曲线 / Speical output characterist

Open the catalog to page 1

JH25 系列霍尔操纵杆 JH25 Series Hall effect Joystick 安装方式 / Mounting Method 4-自攻螺钉（Tapping screw）安装支架 Mounting bracket 后装安装支架 Rear bezel 面板开孔尺寸 Panel arrangements 安装方法A Mounting method A 安装支架 Mounting bracket 前装安装支架 Drop-in bezel 面板开孔尺寸 Panel arrangements 安装方法B Mounting method B 一般性能 / General Specifications 操作角度 Operating angle 约 Approx. ±25°（自中心位置 From center position）操作压力 Operating force 最大操作力 Max. operating force 预期机械寿命 Mechanical life expectancy 工作温度 Operating temperature range 储存温度 Storage temperature range 防护等级 Protection grade IP67 (电气部分 Electrical parts）电气性能 / Electrical Specifications...

Open the catalog to page 2

JH25

JH25

Catalog excerpts

All SENTOP by Shanghai Sibo M&E Co., Ltd. catalogs and technical brochures