PHF8 系列脚踏板 PHF8 Series Pedal 标准尺寸 / Standard Dimensions 线缆长约1m Cable length abt.1m 面板开孔尺寸 Panel Arrangements 选型指导 / Selection Guide PHF8 霍尔型踏板 / Means floor pedal with hall effect contactless POT. incorporated S 单路输出 / Single output P 双路平行输出 / Dual parallel output X 双路交叉输出 / Dual cross output R1 输入5V,输出0~5V(幅值可调) Input 5V, output 0~5V (adjustable signal range) R2 输入9~30V,输出0~5V(幅值可调) Input 9~30V, output 0~5V (adjustable signal range) R3 输入15~30V,输出0~10V(幅值可调) Input 15~30V, output 0~10V (adjustable signal range) R4 输入15~30V,输出4~20mA(幅值可调) Input 15~30V, output 4~20mA (adjustable signal range) CA 输出CANOPEN信号 / CANOPEN output SS 特殊电压/输出 / Special voltage/output ◆ 内置非接触式霍尔传感器 Hall effect IC type ◆ 可安装强降挡装置 Kick-down device is available ◆ 单路或双路全冗余输出 Single or double full redundant outputs ◆ CANOPEN 输出 CANOPEN output 0000 特殊编号:用于特殊的客户需求 Special 4-digit part number: For customized products 无 / None 1米线缆无接插件(标准)/ With 1m cable without connector (standard) J 接插件引出 / With connector 无 / None 无开关 / Without switch A 踩踏初始位置3°左右触发开关信号 Step on the initial position about 3° to trigger the switch signal C 踩踏末端位置3°左右触发开关信号 Step on the end position about 3
Open the catalog to page 1PHF8 系列脚踏板 PHF8 Series Pedal 电气性能(霍尔电位器) / Electrical Specifications (Hall Effect Potentiometer) 电气性能 Electrical Specifications 工作电压 Applied voltage 工作电流(无负载) Current consumption (no-load) 始末端输出偏差 Output deviation at both ends 输出信号 Output Signal 负载电阻 Load resistance 独立线性公差 Independent linearity tolerance 更新速度 Update rate 绝缘电阻 Insulation resistance 介质耐压 Dielectric strength 电气性能(开关)/ Electrical Specifications (Switch) 5A/30V.D.C. 预期电气寿命 Electrical life expectancy 预期机械寿命 Mechanical life expectancy 绝缘电阻 Insulation resistance 介质耐压 Dielectric strength 接线说明 / Terminal Connection Instructions 名称 Title...
Open the catalog to page 2