video corpo

APPLE vario
2Pages

{{requestButtons}}

Catalog excerpts

APPLE vario - 1

APPLE vario: variable in many ways The APPLE vario is a tough rotary mower with variable working width. This is especially convenient if the row width varies or is irregular. The mower dynamically adapts itself to the width of the row. The working width can be adjusted even during use, and the work between the rows can be done in one job. The adjustable height of cut and aerodynamic shaped knives ensure perfect cut quality. Standard version and specifications Optional configuration and accessories > Mows grass and weed up to 1 cm Ø > PTO drive shaft with freewheel and torque limiter (rear and front mounting available) > Hydraulic working width adjustment: synchronous lateral movement of the wings (open/close) > Chassis made of high tensile steel S420 > Central fixed cat. 1 & 2 ISO 3-point rear linkage > Forward and reverse drive > Hydraulic working width adjustment: independent lateral movement of the wings > 540 rpm gearbox without freewheel > Hydraulic side shift* 50 cm [20 inches] (each side 25 cm [10 inches]) > Gearbox 750 or 1000 rpm > Grass is discharged towards the middle > Front support wheels (rubber) > Rotating rear support wheels (rubber), instead of support roller > Input shaft 1 3/8“ Z=6 > Grass is discharged to the side backwards > Front support wheels (metal) > Rear support roller with roller scarper > Front and rear protection with chains > XID double Herbite spraying system with spray nozzels on both sides > VARIOMATIC system Lateral bumper with sensor (only rear mulcher) * not available for model 125-160 > Rotor with horizontally rotating blades SPECIFICATIONS Working width Overall width Depth Height Weight (base value) Blades The information in this document is intended as a guide only. SEPPI M. may change their products or their specifications at any time without any obligation of previous notice

Open the catalog to page 1
APPLE vario - 2

Hydraulic side shift In the standard version, the side wings can be moved independently of each other and thus determine the working width individually. A synchronous version is also available: the wings can be moved at the same time, opening and closing at the same distance. The margin is between 35 and 70 cm [14-28 inches], depending on the model. In addition, the mower can be equipped with a hydraulic side shift. Here, the mower moves to the right and left; the total side shift is 50 cm [20 inches], 25 cm [10 inches] each left and right. ADJUSTMENT OF WORKING WIDTH (lateral wings)...

Open the catalog to page 2

All SEPPI M. catalogs and technical brochures

  1. SMWA rev cf

    2 Pages