Control wheel of height of work. Pushing control by hydropneumatic suspension (adjustable). Hydraulic recovery control (adjustable). Mechanically operated vertical axis disc for cutting fruit tree trunks. Up to 150-200 mm in diameter. Mechanical transmission by power take-off for tractors between 35 and 105 hp. Requiring a double effect hydraulic’s service for the slope and a simple effect service for the hydropneumatic suspension. CHARACTERISTICS f 3 point hitch - cat. II. f Cutting width of 850 mm (32 inches) and 1.200 mm (47 inches). f Backwardation from the axis of the tractor of 3.100 mm (122 inches). f Lenght for the transport of 3.000 mm (118 inches). f 24 tooth HighCut disc. f Mechanical transmission by power take-off. f Pushing control by hydropneumatic suspension (adjustable). f Hydraulic recovery control (adjustable). f Hydraulic location according to the necessity activated from the tractor (1 double effect’s service). f PTO 540 rpm. f Rubber sleeve around the plate. f Lower bowl of control on the ground. f Height adjustable rear wheel. f Model built under EC Normative. f Safety indicators visible to personnel. Carretera nacional 240 km. 149,3 22310 Castejón del Puente (Huesca)-España Tfno. (+34) 974 417 830 www.serrat.com - [email protected] The data presented in this catalog are provided for information purposes only and are not binding.