CVS Stripper Header
6Pages

{{requestButtons}}

Catalog excerpts

CVS Stripper Header - 1

CVS Stripper Header 16,18,20,22,24,28 & 32 foot models Improved harvesting capacity Improved grain quality Improved performance in lodged and hailed crops

Open the catalog to page 1
CVS Stripper Header - 2

CVS Stripper HeaderCereal Special Shelbourne Reynolds has recognised that the limiting factor in combine performance is the ability of the machine to handle large amounts of straw and separate grain from it. The Shelbourne Header has been developed to reduce the amount <

Open the catalog to page 2
CVS Stripper Header - 3

CVS Cereal Special Features: • Spring stainless steel flange tipped fingers give increased wear resistance as well as providing a more aggressive stripping action. The fingers are orientated with the cups facing upwards to aid in stripping hard threshing varieties. These cups also contain the grain and control its trajectory as it moves through the header. • Variable speed belt drive allows the operator to adjust the rotor speed using a cab mounted switch to compensate for changing field conditions. It is common to start in the morning at a fairly high rotor speed when conditions are damp...

Open the catalog to page 3
CVS Stripper Header - 5

General Wheat Harvest: The use of a stripper header provides the average combine with 30% to 50% additional harvesting capacity. The stripping action delivers just the grain and no straw to the combine which improves productivity and reduces losses. Wheat Harvest/Double Crop Soybean Planting: A stripper header enables the farmer to harvest between 1 and 2 weeks earlier than normal at higher moisture (upto 35%) and then plant the new soybeans earlier into the stripped straw. Stripped straw provides a significantly more favourable planting environment because the planter no longer has to...

Open the catalog to page 5
CVS Stripper Header - 6

Range of sizes are as follows: Dimension C ‘Stripping Width’ For complete details of the correct sizes and fitting for the combine on which the Shelbourne Header is intended to be used, please contact your local Shelbourne Reynolds Dealer or the factory direct. Shelbourne Reynolds Engineering Ltd. Shepherds Grove, Stanton, Bury St. Edmunds, Suffolk, IP31 2AR, England T: 01359 250415 F: 01359 250464 Shelbourne Reynolds Inc. 1250 South Country Club Drive, Colby, Kansas, 67701, USA T: 785-462-6299 F: 785-462-6761

Open the catalog to page 6

All Shelbourne Reynolds Engineering catalogs and technical brochures

  1. 7000 SERIES

    155 Pages

  2. 500 Series

    6 Pages