PVC3040
2Pages

PVC dipped - Cut and sewn liner TYPE A JKLMPST 350 mm Due to their design (fully dipped gloves) these products are perfectly tight to certain liquids. They can therefore be used for industry, oil drilling, petrochemicals, cleansing, refining automotive assembly, conveyance and gasoline delivery. industrial fishing, (automotive) garage... >> Technical features aPattern: these gloves are made from polyvinyl chloride aFinish: sandy finish palm. Smooth finish gauntlet. aColour: green. aSizes: 9, 10. aLength: 350 mm (*). aSanitized ® treatment. aPacking: - carton of 50 pairs. - bundle of 10 pairs. More information: (*)Average value aLiquid tight: the brushed liner are adjusted on hand molds generally in porcelain and then dipped automatically in a a P.V.C bath. This way the gloves are fully dipped and liquid tight. aCotton liner: cotton is a natural fibre and can absorb some of the sweat. aP.V.C provides protection against oils, fats, moderately aggressive chemicals and petroleum hydrocarbons. It offers moreover a very good protection against abrasion. aSanitized® treatment: protection against the development of the mould, especially in a humid environment, a protection against microbial attacks, a protection against a discolouration, prevents the bacteria action from bad smell. aThe ISO 9001 / ISO 14001 certified production guarantees the reliability / regularity of the production and the control of the environmental impact. EN 388 : 2016 This glove has been tested according to the following European standards: - EN420 : 2003 +A1 : 2009. Protective gloves - General requirements and test methods. - EN388 : 2016. Protective gloves against mechanical risks. - EN ISO 374-1 : 2016. Protective gloves against dangerous chemicals and micro-organisms. Part 1: Terminology and performance requirements for chemical risks. - EN 374-2 : 2014. Protective gloves against dangerous chemicals and micro-organisms. Part 2: Determination of resistance to penetration. - EN 16523-1 : 2015. Determination of material resistance to permeation by chemicals. Part 1: Permeation by liquid chemical under conditions of continuous contact. - EN 374-4 : 2013. Protective gloves against chemicals and micro-organisms. Part 4: Determination of resistance to degradation by chemicals. - EN ISO 374-5: 2016. Protective gloves against dangerous chemicals and micro-organisms. Part 5: Terminology and performance requirements for micro-organisms risks. EU type examination certificate (module B) issued by SATRA (Irland). Notified body n°2777. The PPE is subject to the conformity assessment procedure based on quality assurance of the production process (Module D) set out in Annex VIII (Category III) under surveillance of SGS Fimko Oy. Notified body n°0598. Download the EU declaration of conformity on: http://docs.singer.fr Your SINGER ® SAFETY’ partner (P.V.C) dipped on a 100% cotton brushed liner. Double dipped. (*) Type of use is given as a guide only. It is to the end user to check whether the product is suitable or not for the intended use. Before any use, read carefully the instructions enclosed with the product. Issue LS 2019_06_13. Copyright: Singer, Fotolia

PVC dipped - Cut and sewn liner EN 388: 2016. Protective gloves against mechanical risks Abrasion resistance (number of cycles) Blade cut resistance (index) Tear resistance (in Newtons) Perforation resistance (in Newtons) «X» means that the glove has not been submitted to the test. Protective gloves against dangerous chemicals and micro-organisms. Part 1.Terminology and performance requirements for chemical risks. Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks. Type A gloves are gloves that have passed i)...