End PostEnd posts with 100mm spacing drilling system RAIL 50x40 RAIL 62x55 8.3mm holes 11mm holes The benefits : • High robustness adapted to line lengths • Space-saving, better harvesting of line ends • Equipped with 0 11mm diameter holes for mooring wires • Customizable rear drilling • Recommended for Precision Shaving (see specific TRP documentation) Coating Z275 (according to currents standards) Why choose SLPA® posts ? •IS1 Packaging Bundles of 216 units for RAIL 50x40 -By request for RAIL 62x55 Life time Robustness suited for low to medium rows lengths • Equipped with 0 8.3mm diameter holes for mooring wires • Possibility of customizable lateral and rear drilling • Possibility of using PG-type hooks at the back, spaced at 30mm min.

Reminder : Recommended maximum interspacing between 2 line posts : 5m For high acidity soils, ZAM coating is recommended. Install the end posts with an appropriate angle of approximately 60°. The recommended installation depth is 1/3 length of the post to guarantee optimal support. Connect the mooring at 2 points on the end post and space it at least 4/5 length of the post to optimize its resistance. Line posts 2/3 Fixing points 1/3 Post length 60° Mooring and fixing points Société Landaise de Profilage Acier ZI Route d’Orthez, 740 Rocade Sud 40700 Hagetmau - FRANCE [email protected] www.slpa-acier...