- Catalogs
- SLPA - Société Landaise de Profilage Acier
- Rail 50x40 et 62x55
- Company
- Products
- Catalogs
- News & Trends
- Exhibitions
Rail 50x40 et 62x55
Rail 50x40 et 62x55
- Rail Dimensions: 50x40 and 62x55
- Length: Minimum 1.5m to Maximum 3m
- Material: S250GD or S250GD XCarb™
- Coating: Z275 according to current standards
- Thickness: 2 mm only
- Packaging: Bundles of 216 units for RAIL 50x40; by request for RAIL 62x55
- RAIL 50x40: Robustness for low to medium row lengths, equipped with ø 8.3mm diameter holes for mooring wires, customizable lateral and rear drilling, possibility of using PG-type hooks at the back spaced at 30mm minimum.
- RAIL 62x55: High robustness for line lengths, space-saving, better harvesting of line ends, equipped with ø 11mm diameter holes for mooring wires, customizable rear drilling, recommended for Precision Shaving.
- Recommended maximum interspacing between two line posts: 5m
- For high acidity soils, ZAM coating is recommended.
- Install end posts at an angle of approximately 60°.
- Recommended installation depth is 1/3 of the post length for optimal support.
- Connect mooring at two points on the end post and space it at least 4/5 of the post length to optimize resistance.
- Société Landaise de Profilage Acier
- ZI Route d’Orthez, 740 Rocade Sud, 40700 Hagetmau, FRANCE
- Tel: +33(0)5 58 44 50 52
- Fax: +33(0)5 58 44 55 75
- Email: [email protected]
- Website: www.slpa-acier.fr
Catalog excerpts
End PostEnd posts with 100mm spacing drilling system RAIL 50x40 RAIL 62x55 8.3mm holes 11mm holes The benefits : • High robustness adapted to line lengths • Space-saving, better harvesting of line ends • Equipped with 0 11mm diameter holes for mooring wires • Customizable rear drilling • Recommended for Precision Shaving (see specific TRP documentation) Coating Z275 (according to currents standards) Why choose SLPA® posts ? •IS1 Packaging Bundles of 216 units for RAIL 50x40 -By request for RAIL 62x55 Life time Robustness suited for low to medium rows lengths • Equipped with 0 8.3mm diameter holes for mooring wires • Possibility of customizable lateral and rear drilling • Possibility of using PG-type hooks at the back, spaced at 30mm min.
Open the catalog to page 1
Reminder : Recommended maximum interspacing between 2 line posts : 5m For high acidity soils, ZAM coating is recommended. Install the end posts with an appropriate angle of approximately 60°. The recommended installation depth is 1/3 length of the post to guarantee optimal support. Connect the mooring at 2 points on the end post and space it at least 4/5 length of the post to optimize its resistance. Line posts 2/3 Fixing points 1/3 Post length 60° Mooring and fixing points Société Landaise de Profilage Acier ZI Route d’Orthez, 740 Rocade Sud 40700 Hagetmau - FRANCE [email protected] www.slpa-acier...
Open the catalog to page 2
