Super heavy self-supporting V Cover Crop

Super heavy self-supporting V Cover Crop Vertical folding CWH R at 3 m on the road Hydraulic connection CWH 2 DA outputs Designed for high power tractors from 120 to 320 CV with working width from 2,35 to 5,80 m, the super heavy self-supporting V Cover Crop is especially effective for stubble cultivation and residue burying. It can also be used to clear forest plots. Hydraulic connection CWH R 3 DA outputs Mechanical adjustment of the angle of the discs (optional hydraulic) Hitch hydraulic offset FOLDABLE BEAM Hitch rotating ring The tool is homologated for 25 km/h thanks to a mecanical coupling...

Mounted on square shaft 40 mm Spacing between discs 230 mm Thickness available: 6, 7 and 8 mm Mounted on square shaft 50 mm Spacing between discs 270 mm Thickness available: 7 and 8 mm Mounted on square shaft 50 mm Spacing between discs 270 mm Thickness available: 10 mm SQUARE BEARING 40 mm Square bearing 40 mm Square bearing 40 mm with standard protection Square bearing 40 mm with reinforced protection Cast iron lids and bearing housings Steel sheath Tapered roller bearings SQUARE BEARING 50 mm Square bearing 50 mm Steel lids and bearing housings Steel sheath Tapered roller bearings Square bearing...

ACCESSORIES PLOUGHING DISC To avoid any trace of the last disc after the roller passage and to get most perfect surface. DEFLECTOR DISC Fixed inside the first disc to avoid excessive earth projection outside the tool working width. LATERAL DEFLECTOR All directions adjutable, it prevents earth projection of the front array from getting out of the rear array working width. BALANCE HYDRAULIC ADJUSTMENT Useful for continuous adjustment while working on very rough ground. ARRAYS ANGLE ADJUSTMENT MANUAL ADJUSTMENT WITH PUSHING ARM As standard, this method ensure easy angle adjustment of the front array...

CHASSIS steel beam 200 x 120 x 10 mm HITCH with rotating ring, height adjustment 3 positions, boom hydraulic offset by a DA cylinder, with optional lifting arm. WORKING WIDTH BALANCE ADJUSTMENT with damper and parallel lifting device. ARRAYS 200 x 120 x 8 mm and 200 x 120 x 10 mm foldable Ø810 mm ANGLE ADJUSTMENT by ratchet pushing arm, 6 positions from 16 to 24°, locking by screw Manganese-silica SHAFT 40 mm, bearings with double row of tapered rollers, lubrication every 100 hours. WHEELS 500/50-17 FL+ MECHANICAL COUPLING HYDRAULIC BRAKING standard TRUCK 2 DA cylinders with hydraulic slider...

Devices with INDEPENDENT DISCS SKYRON fixed independent disc harrow SKYRON folding independent disc harrow SKYRON self-supporting independent disc harrow Devices with DISCS X ORBIS self-supporting X combining sprayer ZéNITH RXH self-supporting X combining sprayer ZéNITH RGH self-supporting X combining sprayer ZéNITH RZH self-supporting X combining sprayer ZéNITH RJH self-supporting X combining sprayer PHéNIX TGX self-supporting X sprayer PHéNIX TBX self-supporting X sprayer Devices with DISCS V CWH - CWHR super heavy self-supporting V Cover Crop SYNCHRONIC CIN self-supporting V Cover Crop CLH...