SYNCHRONIC CIN Self-supporting V Cover Crop

SYNCHRONIC CIN Self-supporting V Cover Crop Hydraulic adjustment of the angle of the discs Longitudinal folding at 2,50 m on the road Hitch fixed ring or rotating ring MAIN CHASSIS Double beam 180 x 100 x 8 mm for high sturdiness in difficult conditions. Hydraulic connection : 2 DA outputs Wheels lifting by 1 DA cylinder INTERMEDIATE CHASSIS 150 x 100 x 10 mm for perfect rigidity of the assembly in deep and difficult work. SAFETY Homologated without braking for 40 km/h as standard. PIVOTING REMOVABLE HITCH Mechanical or hydraulic adjustable of height 3 positions. Fixed ring or rotating ring....

DISCS WITH INSIDE SHARPENING DISCS Ø660 • • • Mounted on square shaft 40 mm Spacing between discs 230 mm Thickness available: 7 ou 8 mm Mounted on square shaft 40 mm Spacing between discs 260 mm Thickness available: 7 ou 8 mm ROLLER ROL 10 The SYNCHRONIC CIN can be equipped with a rear roller to crumble on the surface of the ground. The roller has hydraulic adjustment. However it also has a damping spring to deal with ground flatness defects TUBES Ø550 mm, 10 tubes Flanged ball bearing Ø50 mm • • • • Dry and hilly lands Clays and sands Good tamping Weight : 130 kg/m FLAT IRONS Ø500 mm, 10 flats...

ACCESSORIES PLOUGHING DISC Ø510 To avoid any trace of the last disc after the roller passage and to get most perfect surface. DEFLECTOR DISC Ø510 Fixed inside the first disc to avoid excessive earth projection outside the tool working width. LATERAL DEFLECTOR All directions adjutable, it prevents earth projection of the front array from getting out of the rear array working width. BALANCE HYDRAULIC ADJUSTMENT Useful for continuous adjustment while working on very rough ground. BEARINGS Square bearing 40 mm Cast iron lids and bearing housings Steel sheath Tapered roller bearings Square bearing...

CHASSIS steel beam 180 x 100 x 8 mm, intermediate arrays holder beam 150 x 100 x 10 mm WORKING WIDTH HITCH with fixed ring, adjustable in height 3 positions BALANCE ADJUSTMENT with damper TRUCK 1 DA cylinder with hydraulic slider for depth control (transport safety) PARALLEL LIFTING DEVICE ARRAYS 150 x 100 x 8 mm with angle hydraulic adjustment 9 positions from 8° to 24° by 1 DA cyllinder POWER SQUARE AXLE of 60 mm, 6 axes Manganese-silica SHAFT 40 mm, bearings with double row of tapered rollers, lubrication every 100 hours LONGITUDINAL FOLDING for transport by the arrays adjustment DA cylinder...

Devices with INDEPENDENT DISCS SKYRON fixed independent disc harrow SKYRON folding independent disc harrow SKYRON self-supporting independent disc harrow Devices with DISCS X ORBIS self-supporting X combining sprayer ZéNITH RXH self-supporting X combining sprayer ZéNITH RGH self-supporting X combining sprayer ZéNITH RZH self-supporting X combining sprayer ZéNITH RJH self-supporting X combining sprayer PHéNIX TGX self-supporting X sprayer PHéNIX TBX self-supporting X sprayer Devices with DISCS V CWH - CWHR super heavy self-supporting V Cover Crop SYNCHRONIC CIN self-supporting V Cover Crop CLH...