Engine Specifications:
Mitsubishi 3-Cylinder water-cooled engine with 20 HP. It features natural aspiration, a cubic capacity of 953 cc, and a rated RPM of 2700. The engine includes a dry air cleaner with a clogging sensor and a standard cold start feature. Maximum torque is 52 Nm, and the exhaust silencer is located in the engine compartment with downward discharge.
Transmission:
The vehicle is equipped with a 4WD drive system, single clutch, and a sliding mesh gearbox with 6 forward and 2 reverse gears. The maximum forward speed is 15.1 km/h, and the minimum is 1.36 km/h.
Brakes:
Features dry drum brakes with mechanical actuation and an independent parking brake. A foot-operated differential lock is included.
PTO:
Mechanical actuation with PTO speeds of 540 and 1000 rpm.
Steering and Electrical:
Mechanical steering with a 12V, 60 Ah battery and a 12V, 42 A alternator. A seven-pin trailer socket is standard.
Hydraulics:
Includes a Cat 1-N 3-point linkage, anchor chain stay bars, one additional hydraulic circuit, and a lifting capacity of 600 kg. The hydraulic flow rate is 13.3 LPM.
Safety Features:
Standard PTO, neutral, and clutch safety switches.
Capacity and Dimensions:
Fuel tank capacity is 26 liters. The turning radius without brakes is 3.2 m (RHS) and 3.3 m (LHS). The vehicle weighs 970 kg, with a wheelbase of 1420 mm, total length of 2735 mm, width of 945 mm, and height up to ROPS of 1945 mm. Minimum ground clearance is 200 mm.
Tyres:
Standard front tyres are 5.00-12 and rear tyres are 8.00-18. Optional radial and industrial tyre configurations are available.
Additional Features:
Includes a fuel indicator gauge, front tow hook, and front and rear weights with standard ballast. ROPS is included, and a front loader is optional.
Contact Information:International
Tractors Limited, with offices in New Delhi and Hoshiarpur, Punjab, India. Contact via phone or email for more information.