SILOFARM

SILOFARM

Product catalog summary
Product Overview
The document provides a specification sheet for SOLPLAST's Silage Film, detailing its properties and performance under optimal conditions. It includes a disclaimer that the data may vary based on product dimensions and equipment, and SOLPLAST reserves the right to modify the data without notice.

Product Specifications
  • Thickness: 150/200 microns, measured according to ISO 4591.

Mechanical Properties
  • Tensile Strength at Break: 21 MPa in the machine direction (M.D.) and 19 MPa in the transverse direction (T.D.), as per EN ISO 527.
  • Elongation at Break: 450% in M.D. and 650% in T.D., according to EN ISO 527.
  • Impact Resistance F50: 325 grams for flat and 150 grams for fold, measured by ISO 7765.

Optical Properties
  • Relative Light Transmission: Less than 10^-3%, as per EN 2155.
  • Film Reflection W/B: Greater than 50%, according to EN 2155.

Ageing Properties
  • Agricultural Seasons: 12 months in areas with radiation of 130 Kly/year. For different conditions, consultation with SOLPLAST is advised.

Additional Information
For further options or inquiries, contact SOLPLAST at [email protected].
See more

Catalog excerpts

SILOFARM-1

SILAGE FILM SILOFARM PROPERTIES MECHANICAL PROPERTIES Tensile strength at break OPTICAL PROPERTIES Relative light transmission Film reflexion W/B AGEING PROPERTIES Agricultural seasons (*) Properties made on a 150 microns film. (**) Duration in areas with radiation of 130 Kly/year. For different conditions, contact SOLPLAST S.A. All the data contained in this Specification Sheet has been obtained through our own experience and is offered at an informative level. They are obtained under optimal process conditions and therefore may vary depending on product dimensions, extruding equipment, etc. SOLPLAST reserves the right to change these data at any time without notice. These data are given with all the goodwill but as the circumstances and conditions upon which this information could be used are beyond our control, we cannot accept any responsibility for any lost or damage caused by its use. For any other option consult with us at [email protected]

 Open the catalog to page 1

All Solplast S.A. catalogs and technical brochures

  1. ECOSOL

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.