The ultimate system to quickly attach penning and equipment to concrete slats. PERFORMANCE: DURA-LOCK allows you to bolt penning and equipment down from the top DURA-LOCK is made out of Dupont Super-Tuff Nylon providing superior with no protruding bolt to injure animals. DURA-LOCK also eliminates the impact and wear resistance. need to cut and grind off bolts. SPECIFICATION: INSTALLATION: DURA-LOCK is designed with a hex nut embedded inside the Dupont DURA-LOCK can be installed as easily as sliding it in the slot opening, turning Super-Tuff Nylon. Each DURA-LOCK includes a 3/8" x 4" stainless steel and pulling the lock into place. DURA-LOCK requires a one-inch wide opening bolt and washer. DURA-LOCK Fasteners are conveniently packaged for inserting the lock through the top. If you are unable to insert from the top you can insert from the bottom. A 3/8” hole or opening would be required for the bolt. Don't over tighten; hand tightening is all that is required to secure DURA-LOCK has been designed for concrete slat application and may the bolt. Tool setting must not exceed 35-foot pounds of torque. not be appropriate for use in all other applications.

INSTALLATION INSTRUCTIONS DURA-LOCK ALLOWS MANY OPTIONS FOR INSTALLATION. Generally you will be able to simply turn Dura-Lock and feel or see if it is situated in the correct locked position. Pull up on the bolt head or push up the Dura-Lock from its underside and tighten accordingly. You may choose to pre-load Dura-Locks into confinement equipment before installing it. Guide each Dura-Lock into its designed position and adjust equipment as you connect it to the slats. YOU CAN INSTALL AND TIGHTEN DURA-LOCK FROM THE TOPSIDE OF SLAT EVEN THOUGH YOU CAN'T SEE YOUR WORK. Using the stainless bolts...