Cow traffic • Automated draw gate: Autolift 4.1 • Heavy duty draw gate: Lift 4.5 • Pasture gate one-way gate 4.8 • Topgate one-way gate 4.9 • Mobile partition gate: Track 4.10 • Telescopic gate: Slider 4.11 • Partition barriers at young stock stables 4.15 • Omke adjustable fences, young stock 4.16 • Partition barriers with plastic panel 4.17 • Partition barriers accessories and fittings 4.18

Automated draw gate: Autolift Autolift Many processes in livestock farming have already been automated. However, cow traffic has not yet been automated. The farmer still has to open and close the gates manually. Autolift automatically moves several cow traffic gates into specific positions to determine the desired route for a particular group of animals. The gates The gates in the Autolift system are robust constructed draw-up gates that can move up and down. draw-up gates are the least susceptible to being blocked by animals. When they go up, the animals in the vicinity will move backward; when...

Automated draw gate: Autolift Autolift - stand alone Robust electrically powered draw gate, equipped with push button control. • Partition barrier, beams 60 mm; • Electric drive, mounted at the top; • Counterweights, incorporated in the uprights; • Minimum installation height 400 cm; • Clear passage when gate is 'open' in highest position: 280 cm; • Clear passage (for manure robot) when gate is closed: 80 cm. • Drive: 0.25 kW worm gear motor gearbox; • Worm gear motor gearbox, control panel, push button, limit switches, and main switch completely pre-assembled; • Each Autolift requires a 230...

Remote control Autolift Remote control Autolift In addition to the push button, a basic control for the Autolift is also available: the Autolift remote control. With this basic version, it is possible to raise/lower the Autolift gates remotely without WiFi or a smartphone. This allows the cows to be driven to the temporary waiting area or separation area, for example, and the gate can be operated while you walk behind the cows (being collected). The Autolift gates can also be operated from the shovel while spreading (deep litter) in the cubicles, for added convenience. The radio remote control...

Installation examples Autolift +31 (0)512 - 23 78 00 Q [email protected] Q www.spinderdhc.com

Heavy duty draw gate: Lift Draw gate - heavy duty: Lift The heavy duty draw gate is a very robust draw gate, suitable for passages with a width of 220 cm to no less than 550 cm. Light and quick to move thanks to the practical locking mechanism and the counterweight concealed in the support posts. The minimum installation height required for this gate is 300 cm. In the 'open' position, there is 210 cm of free space under the gate. Heavy duty draw gates with a larger free passage can be supplied on request. The total length of the balance draw gate is adjustable between the specified dimensions....

Barrier gates Detail A 4.6 Barrier, spring-supported For quick and easy closure of large crossings such as feed alleys. The barrier can be rotated 360 degrees around the supplied floor-mounted support post (76 mm x 100 cm). One locking point is also included, which can be attached to the wall or to a 76 mm support post. In combination with multiple locking points, animals can easily be driven in multiple directions. The minimum installation height is approx. 400 cm. • Barrier, spring-supported Barrier gate, spring loaded 300-550 cm Fittings: Additional locking point Threaded strap 76 mm x 105...

One-way gates 88 Texas gate A Texas gate can be used to easily close off the separation corridor or exit of the milking robot. A Texas gate consists of a set of Texas doors mounted on a robust 60 mm gate. The 60 mm gate is mounted to the ground with two mounting feet made of thick-walled 70 mm tubing on a heavy base plate. The Texas gate can be placed on concrete or slatted floors. 03.19.500 One-way Texas gate, complete Fittings Floor anchor M16 x 120 mm (4 per Texas gate) T-bolt M16 x 280 mm with nut (4 per Texas gate) • Texas gate Pair of Texas doors 106 94 Pair of Texas doors Fittings Threaded...

Pasture gate one-way gate Pasture gate one-way gate It may be necessary to use one-way gates in a wider passage, where the passage must be able to be cleared (a pasture gate is an example of such a situation). Depending on the width of the passage and the amount of cow traffic, you can choose between a single or double version of the Pasture gate. • Equipped with the necessary Texas doors as standard; • Equipped with adjustable pivot point as standard; • Equipped with a universal locking point as standard; • Free passage (for manure robot): 65 cm. • Made from 60 mm tube; • Gate height side pieces:...

Topgate one-way gate Cow traffic Topgate one-way gate The Topgate is a one-way gate, available in various widths up to 5 meters. The gate works with vertical bars that can only hinge in one direction. A passing cow pushes the bars forward, after which they fall back into a vertical position with a soft close. Design & installation • Prepared for mounting to support columns or concrete walls • Consists of bars with accompanying forks (sound-absorbing), hinge tube, stop bar, and two sturdy mounting plates • Passage width: 100 cm (gate width 150 cm) • Each additional bar increases the width by 25...

Track The Track is designed so that the available space can be quickly and easily adjusted to the changing needs of the herd without heavy lifting. The Track makes it easy to adjust the number of feed openings or cubicles available to suit the size of the group. This not only increases cow comfort, but also makes work easier for the farmer. Details: • The rails are supported max. every 3.55 meter; • Maximum width of Track frame is 6 meter; • Maximum passage width depends on the Slider; • Movement on rails: plastic rollers; • Locking pin for securing the system. The Spinder Track basic set consists...