Eating • Highline® safety feed front cows 2.1 • Highline® safety feed front heifers/jerseys 2.4 • Limoline self-locking feed front 2.5 • Limoline self-locking feed front to columns 2.7 • Baseline self-locking feed fronts 2.9 • Openline self-locking feed fronts 2.13 • Tombstone feed front 2.15 • Diagonal feed front 2.17 • Fittings feed fronts 2.18

Highline® safety feed front cows Top model safety feed front A feed front is more than just access to roughage. Spinder's safety feed front was designed with that in mind. The safety feed front provides greater freedom of movement for the cow and ensures peace and quiet during feeding. In addition, a great deal of attention was paid to the safety for cow and people, ease of operation and efficient work during herd treatments or individual treatments. The safety feed front also has a locking system that is fully integrated into the special upper section. The use of high-quality plastics creates...

Highline® safety Feed Front cows Eating Heavy-duty self-locking safety feed front where the locking mechanism is completely enclosed in the top railing. (6 feed openings) (5 feed openings) (5 feed openings) (4 feed openings) (4 feed openings) (4 feed openings) (3 feed openings) (3 feed openings) (3 feed openings) (2 feed openings) (2 feed openings) Feeding place width approx. 65 cm approx. 75 cm approx. 65 cm Support post 76 mm x 200 cm Floor-mounted support post 76 mm x 170 cm Plastic protective sleeve 76 mm Stopper 76 mm Set of feed front fasteners 76 mm Operating handle Set center mounts Highline...

Highline® safety feed front to columns 500 This page presents two solutions for mounting Highline feed fronts to support columns with a center-to-center distance of 5.00 m. The chosen solution is attachment to HEA180 columns or to (wooden) columns 200mm. Starting points: • The feed front is hung at a slight angle forward. I.e. the top railing is mounted on the front of the columns/support posts and the lower bar is mounted between the columns/support posts; • Mounting a centre support post is not necessary with a forward leaning feed front; • The lower bar must be fixed to the concrete wall under...

Eating Heavy-duty self-locking safety feed front where the locking mechanism is completely enclosed in the top railing. Feeding place width (5 feed openings) (4 feed openings) (3 feed openings) (2 feed openings) approx. 65 cm approx. 65 cm approx. 65 cm approx. 65 cm Support post 76 mm x 180 cm Floor-mounted support post 76 mm x 160 cm Plastic protective sleeve 76 mm Stopper 76 mm Set of feed front fasteners 76 mm Operating handle Hinge assembly for rotating gate Castor wheel (for rotating gates longer than 2 m) By combining certain feed front elements and feed front fasteners, practically all...

Limoline self-locking feed front Eating • Self-locking feed front Limo. Self-locking feed front heavy model Limo The Limoline is the heavier and raised version of the Baseline self-locking feed front. With a spacious 40 centimeter head opening and a height of 104 centimeters, this gate is suitable for the modern large cow. This feed front is also equipped with the Spinder 'hidden locking mechanism' system, where the operating parts are integrated into the upper section. The push button for releasing a secured cow sticks out at the top through the profile. This allows the animals to be released...

Limoline self-locking feed front Eating Heavy constructed self-locking feed front with the locking mechanism completely integrated in the top railing. (7 feed openings) (6 feed openings) (5 feed openings) (5 feed openings) (4 feed openings) (4 feed openings) (4 feed openings) (3 feed openings) (3 feed openings) (3 feed openings) (2 feed openings) (2 feed openings) Feeding place width approx. 70 cm approx. 70 cm approx. 70 cm approx. 65 cm approx. 75 cm approx. 70 cm approx. 65 cm approx. 75 cm approx. 70 cm approx. 65 cm approx. 75 cm approx. 65 cm Accessories Support post 76 mm x 200 cm Floor-mounted...

Limoline self-locking feed front to columns 500 (482) This page presents two solutions for mounting Limoline feed fronts to support columns at 5.00 m center-to-center. The chosen solution is mounting to HEA180 columns or to (wooden) columns 200mm. Starting points: • The feed front is hung at a slight angle forward. I.e. the top railing is mounted on the front of the columns/support posts and the lower bar is mounted between the columns/support posts; • Mounting a centre support post is not necessary with a forward leaning feed front; • The lower bar must be fixed to the concrete wall under the...

Baseline self-locking Feed FrontsBaseline self-locking feed fronts Simple yet strong, these are the Baseline self-locking feed fronts. Equipped with the typical Spinder hidden locking mechanism. Only the push button for releasing a secured cow sticks out from the upper profile. No hook parts for the cow! Available for cows and also for heifers, young cattle and calves. Various feeding place widths and appropriate heights. This allows the animals to get used to the feed front from an early age. Equipped with the Spinder plastic movable bar stopper; nice and quiet, and with a fall pipe in the catching...

spinder Baseline self-locking Feed Front cows Cr°ss-section of (4 feed openings) (4 feed openings) (4 feed openings) (3 feed openings) (3 feed openings) (3 feed openings) (2 feed openings) Feeding place width approx. 65 cm approx. 75 cm approx. 70 cm Support post 76 mm x 180 cm Floor-mounted support post 76 mm x 160 cm Plastic protective sleeve 76 mm Stopper 76 mm Set of feed front fasteners 76 mm Operating handle Hinge assembly for rotating gate Castor wheel (for rotating gates longer than 2 m) By combining certain feed front elements and feed front fasteners, practically all truss sizes, larger...

Feeding place width per animal 55 cm. Age from approx. 9 to 18 months, depending on the type of cattle. For heifers from 18 months we recommend the self-locking feed front for cows. 325 cm (6 feed openings) 274 cm (5 feed openings) 219 cm (4 feed openings) 171 cm (3 feed openings) 119 cm (2 feed openings) 325 cm (6 feed openings) 274 cm (5 feed openings) 219 cm (4 feed openings) 171 cm (3 feed openings) 119 cm (2 feed openings) Support post 76 mm x 180 cm Floor-mounted support post 76 mm x 160 cm Plastic protective sleeve 76 mm Stopper 76 mm Set of feed front fasteners 76 mm Operating handle...