Manure disposal • Manure scraper general 6.1 • Control panel for manure scrapers 6.2 • Slatted floor scraper 6.4 • Centre strip slatted floor scraper 6.5 • Combiscraper for flat concrete floor 6.6 • Combiscraper for slotted floor 6.7 • Dragline cross channel stackable manure 6.8 • Manure scrapers in practice 6.10 • Total solution sand bedding system 6.11 • Tractor-driven manure mixers 6.12 • Electric driven manure mixers 6.13

Manure scraper general Manure scraper with Spinder PE rope drive To work quickly and efficiently and promote the welfare of your cows, it is important that the passages and cubicles in the barn are clean and dry. proper and fast manure disposal is therefore essential. Moisture and manure on the floor may cause slipping and thus the risk of injuries. Manure on the cows' legs causes dirty cubicles and thus dirty udders. Moisture and manure in the cubicle form an excellent environment for contagious bacteria, which cause hoof diseases and other infections. To prevent these problems, Spinder offers...

Control panel For manure scrapers DAIRY HOUSING CONCE P T 5 All Spinder PE rope installations can be controlled with Prinzing electronic control panels. The electronic control panels operate by continuously measuring the power consumption of the drive motor. The drive motor is switched off when the set value for maximum traction/power consumption is exceeded. • Continuous traction force measurement by measuring the power consumption of the drive motor; • Automatic or manual setting of maximum traction/power consumption; • Possibility of different values for maximum traction/power consumption...

Control panel For manure scrapers Manure disposal Electronic control ESC400 with control via an app • Suitable for up to 6 systems, each with 2 drive units. The drive units do not all have to be equally 'heavy'. All combinations of 0.55 kW and 0.75 kW are possible; • Operation also possible via smartphone, tablet, or PC. For this, the ESC400 must be connected to a network; • Learning program for automatic setting of all control parameters; • Individual programming of each manure removal system (2 drive units) to be operated via touchscreen, smartphone, tablet, or PC; • Drive motor shuts down...

Slatted floor scraper Slatted floor scraper The scraper is the heart of the slatted floor scraper system and determines the final scraping result. The Spinder slatted floor scraper has a modular design. A suitable scraper can be assembled from a base frame for every type of slatted floor, with or without a rubber top layer, and for every manure alley. Important features: • Virtually no protruding parts that could injure the animals; • Fully hot-dip galvanized in accordance with NEN-EN-ISO 1461; • Very accurate depth adjustment by means of 4 adjusting bolts; • Standard design with 2 trapezoidal...

Centre strip slatted floor scraper Centre strip slatted floor scraper To reduce manure emissions even further, the slatted floor scraper can be fitted with a third strip as an option. This strip is mounted in the middle of the scraper and is easily adjustable in height. Due to normal wear and tear of the flexible rubber center strip, it will need to be adjusted regularly for optimal scraping results and replaced in time. Advice: The extra strip is recommended when using a slatted floor scraper on all low emission slatted floors. Examples of wellknown low emission slatted floors are: • Ecovloer...

Combi-scraper for flat floor, manure alley Combiscraper For flat concrete floorCombi-scraper In a barn situation with solid floors, it is extremely important to remove manure quickly. Only by scraping frequently is it possible to keep the alleys clean and prevent slipping. In addition, the rapid removal of manure contributes to reducing ammonia emissions. The Spinder combi-scraper has been specially developed for solid floors, with or without a rubber top layer. Thanks to its sturdy and fully galvanized design, the scraper is built for intensive use and can be adapted to the type and width of...

Combiscraper For slotted floor Combiscraper for slotted floor The floor elements are equipped with slots that run parallel to the feed alley. The slots separate urine and manure, resulting in lower emissions compared to traditional slatted floors. The slots are cleaned by means of so-called teeth on the scraper blade. The scrapers are available in standard widths of 200400 cm. Different sizes and designs of the combi-scraper are available on request. Important features: • Heavy, welded scraper blades ensure a clean scraping result. • Wear-resistant sliding feet under the scraper made of manganese...

Dragline cross channel stackable manure Dragline cross channel Manure can be removed in various ways. Current regulations often focus on emission reduction. An innovative way to remove stackable manure with low emissions is to use a cross channel. This allows the thick fraction (often mixed with straw) to be removed to a manure plate. The thin fraction (urine) is removed directly to the manure pit via the low emission floor. It is also possible to close the floor, with the aim of removing fresh manure via a cross channel to fill a manure digester. Three types of draglines are available as standard...

Discharge flap Discharge flap In the event of a discharge opening, it is possible to seal it with a discharge flap. The discharge flap is intended to cover the discharge opening securely and reduce additional emissions. The flaps can be driven over and are opened automatically by the manure scraper. The discharge flaps are made to customer specifications and can be ordered in the dimensions below. Important features: • Heavy galvanized checker plate with welded cross strips; driveable and walkable; • To be opened by the manure scraper, with a specially designed bolt-on flap opener; • Standard...