Item-nr. Description 0413061 plate f. T-clamp 31x60mm, Fitbox 7106045 hexagon-head bolt M6x45 galv. 7110040 hexagon-head tap bolt M10x40 galv 8206400 self locking capped nut M6 galv. 8210500 self locking nylon nut M10 galv. freestall divider Fitbox - 60mm Number: Drawing remains our property and may not be reproduced, shown or entrust to third party or used otherwise. No rights can be derived from this drawing.

Attention! Place the support post in the center of the box. Dimensions of cubicle cover to underside of clamp Height of the retaining belt Outer dimensions of the bars The height of the freestall is measured from the cubicle covering ** In case of a gap of 200-450mm between the box and the wall fill the space to prevent cows from being trapped. Item no. Description 0118310 shoulder rail strap clampset for Fitbox *Dependent on the chosen boxwidth Attention! Support post should stand straight. 01921xx waved neck bar, complete - 2x...cm 0409020 strap clamp 48x60mm 1021140 support post 60mmx140cm...

Dimensions of cubicle cover to underside of clamp Outer dimensions of the bars The height of the freestall is measured from the cubicle covering ** In case of a gap of 200-450mm between the box and the wall fill the space to prevent cows from being trapped. *Dependent on the chosen boxwidth Item no. Description 0118310 shoulder rail strap clampset for Fitbox Attention! Support post should stand straight. 01921xx waved neck bar, complete - 2x...cm 0409040 strap clamp 76x60mm 1026145 support post 76mmx145cm floor mounted 1020600 tube 60mm, length 6m, galvanized 1106250 stopper 76mm 1111250 floor...

Attention! Place the support post in the center of the box. Dimensions of cubicle cover to underside of clamp Height of the retaining belt Outer dimensions of the bars The height of the freestall is measured from the cubicle covering ** In case of a gap of 200-450mm between the box and the wall fill the space to prevent cows from being trapped. *Dependent on the chosen boxwidth Attention! Support post should stand straight. shoulder rail strap clampset for Fitbox waved neck bar, complete - 2x...cm tube 48mm, length 6m, galvanized support post 60mmx140cm floor mounted floor anchor, hot dip galv....

Dimension A = box size B - 200 - 250 Step 1: Cut the fiberglass rods to size, for the desired box size E, the rod should be cut to length D. When sawing, dust may be released, we therefore recommend using a dust mask or a saw table with water cooling. Due to dust formation do not grind the fiberglass rods. rnzr- Step 2: Mount the clamps and fiberglass rods to the post. Mount the clamps to the post so that the bottom of the lower fiberglass rod is 35 cm above the bed, and the top of the upper fiberglass rod is on 125cm above the bed. iL' ijr For a single box, first tighten the bolts on position...