Drinking • Pingo drinking troughs 3.1 • Renovation drinking throughs Pingo Reno 3.2 • Classic drinking troughs 3.4 • Individual drinking troughs 3.5 • Circulation unit / eyelet 3.7

8 extra floor anchors for extra wall mounts Pingo drinking troughsPingo drinking troughs Important features: • Natural supply of water in a wide trough, large drinking surface; • No sharp edges, integrated stainless steel protective bracket on three sides; • Water flow up to 40 l/min, water pressure from 1 to max. 5 bar. • The drinking trough is easy to clean thanks to the sloping bottom, large outlet, and handy removable plug; • The float is also easy to clean thanks to the easy-to-remove (green) float cover; • Universal mounting. The Pingo can be mounted on the wall or on the floor; • Long...

Renovation drinking throughs Pingo Reno Pingo Reno, with plastic back wall Renovation drinking throughs Pingo Reno Important features: • Pingo and cubicle wall in one complete set; • Solid plastic cubicle wall, up to the floor; • Replaces the (concrete) end wall; • No water spillage in the cubicles; • Can be used on the slatted floors and on the cubicle deck. Implementation form In renovation, situations arise where the posts are placed on the slatted floor or on the cubicle deck. If the posts are mounted on the cubicle deck, you can choose to mount the cubicle wall level or on a slope (max....

Reno wall Reno wall Important features: • Solid plastic cubicle wall, up to the floor; • Replaces the (concrete) end wall; • Can be used on the slats and on the cubicle deck; • Simple and quick solution for both renovation and new construction situations. Implementation form In addition to the renovation Pingo Reno drinking trough, it is also possible to order the complete Reno wall separately. This makes it easy to create a partition in a designated area, in this case without a drinking trough. The wall can be placed on either the cubicle deck or the slatted floor. The wall is supplied with...

Classic drinking troughsDrinking trough model 150, 200 and 300 Cows are herd animals. They like to stand at a long drinking trough with many cows at the same time. A drinking trough is ideal for providing many cows with clean drinking water in a short period of time. These long drinking troughs are also very easy to clean. After removing the plug, the dirt disappears into the manure pit. Type 150 (length 150 cm) has a tank capacity of approximately 100 liters and provides sufficient drinking space for approx. 15 cows. Type 200 (length 200 cm) has the same features as type 150, but has a drinking...

Individual drinking troughs Drinking water is vital Milk consists of almost 90% water. Cows also need a large amount of water every day for their metabolism. A high-yielding cow drinks an average of approximately 160 liters of water in 9 drinking sessions per day. This places high demands on the drinking water supply. To ensure that all cows have access to sufficient water, it is recommended to install one drinking trough per 20 cows. In addition to quantity, the quality of the drinking water is also important. It is therefore essential that the drinking troughs can be kept clean. For this reason,...

Mounting plate, for Fastening clamp 169 Fastening clamp 179 Suevia drinking bowls Drinking +31 (0)512 - 23 78 00 Q [email protected] Q www.spinderdhc.com

Circulation unit / eyeletSuevia circulation unit with heating Circulation system for all cold barns with drinking troughs. The water is heated and circulated. Maximum pipe length, including return pipe, approx. 200 meters for the 3000 Watt version and approx. 350 meters for the 6000 Watt version. The circulation unit is equipped with 1 or 2 heating elements, an adjustable thermostat and a circulation pump. The system works as a boiler installation, which can cause pressure to increase in the pipes. The water pressure in the supply pipe must be at least 1 bar and may not exceed 4 bar. To protect...