Resting
26Pages

{{requestButtons}}

Catalog excerpts

Resting - 1

Product catalogue

Open the catalog to page 1
Resting - 2

Spinder since 1973 Tjip Spinder started manufacturing and selling dividers and feed fronts in 1973, using the name Spinder Stalinrichting. What started as a metal workshop, quickly became a small factory and eventually grew into Spinder as we know it today: a leading, advanced manufacturing company with a modern range for contemporary dairy farms. Tjip Spinder was a real all-rounder and expected the same from his employees. “You were given an overall and a task and that was it”, says Dick van der Meer, employee since the start and now co-foreman in the assembly department. With the ink...

Open the catalog to page 2
Resting - 3

• Freestall divider model 'Profit' 1.1 • Freestall divider model 'Comfort-NG' 1.4 • Freestall divider model 'Comfort' 1.6 • Freestall divider model 'Cosmos' 1.7 • PE retaining knee rail 1.11 ® 00 31 (0)512 - 369160 E-mail: sales@spinder.nl Website: spinder.nl january 2018 Resting

Open the catalog to page 3
Resting - 4

freestall divider model 'Profit' Freestall divider model 'Profit' Spinder introduced the freestall divider model 'Profit' in 1996. During all these years the 'Profit' has been applauded for it’s simple, sturdy construction, it’s general applicability and the fact that it is so easy to install. But the most important feature of this model is that the 'Profit' offers excellent cow comfort. And, as the result of the unique design, this divider positions the animals in a straight line in the stalls. Therefore the animals stay much cleaner. General applicable The freestall divider model 'Profit'...

Open the catalog to page 4
Resting - 5

freestall divider model 'Profit' Freestall divider model ‘Profit’ 216 for cows Freestall divider model ‘Profit’ 206 for cows Freestall divider model ‘Profit’ 190 for cows Freestall divider model ‘Profit’ 175 for heifers Freestall divider model ‘Profit’ for cows and heifers (mounting support piece and T-clamp included) Stall width 115-120 center to center Fittings Shoulder rail strap clamp 48 x 60 mm Strap clamp 48 x 60 mm Floor anchor M12 x 106 (3 per divider) Chemical anchor M12 (10 anchors), an alternative to floor anchor Tube 48 mm, length 6 m Tube clamp coupling 48 mm End coupling 48 mm...

Open the catalog to page 5
Resting - 6

freestall divider model 'Profit' In a modern dairy operation much attention is paid to young stock, and especially to the housing of the young animals. The freestall dividing system is used for all age categories. At a very early age the young animals can get familiar with dry, comfortable and safe stalls, adjusted to their size. A proper, hygienic environment is essential for the development of these animals, and therefore required for an optimal performing dairy cow. With this in mind, Spinder has designed the freestall 'Profit' for every age group. The 'Profit' freestall dividers for...

Open the catalog to page 6
Resting - 7

freestall divider model 'Comfort-NG' 10.15.600 Freestall divider model Comfort-NG This freestall divider looks a lot like the model Profit. The Spinder curl, the shape of the lower bar, is almost similar. The characteristics of the divider are thus also very similar. Sturdy and robust, positioning the animals in a straight line in the cubicle. At the front the Comfort is more open, leading to even more space to lie down or stand up. Stall width 115-120 center to center Optimal resting comfort due to careful design; Extra space at the front; Durability, due to suspended construction;...

Open the catalog to page 7
Resting - 8

freestall divider model 'Comfort-NG' Freestall divider model 'Comfort-NG', mounted to horizontal tubing Important advantages: • Shoulder rail height 120 cm, therefore plenty of room for getting up and laying down; • Freedom when resting due to the special design; • Durability, due to the suspended construction; • Adjustable in height and width; • Stall is easy to clean; • Meadow mattress or waterbeds can be placed without any problem; Model 'Comfort-NG' 218 - stall floor ≥ 250 cm Model 'Comfort-NG' 208 - stall floor 240 cm Model 'Comfort-NG' 193 - stall floor 220 cm Model 'Comfort-NG'...

Open the catalog to page 8
Resting - 9

DAIRY HOUSING CONCEPTS freestall divider model 'Comfort' Stall width 60-70 center to center

Open the catalog to page 9
Resting - 10

freestall divider model 'Cosmos' The Spinder 'Cosmos' free stall divider is a prime example of an 'open' cubicle. Large and spacious: therefore very animal friendly. This open system provides room enough for the cow to move naturally, when getting up and laying down. Consequentially the cows will lay down sooner which will improve production and hoof health. For matting we advise a cow mattress: the Spinder Meadow mattress or the waterbeds. The combination Cosmos and loose bedding is also a possibility. The PE retaining knee rail ensures for a perfect position of the animal, resulting in...

Open the catalog to page 10
Resting - 11

freestall divider model 'Cosmos' 01.15.500 Model 'Cosmos' for cows, single row at outer wall Fittings Floor anchor M12 x 106 (4 per divider) Tube 60 mm, length 6 m Tube clamp coupling 60 mm End coupling 60 mm Knee rail attachment PE125 for 'Cosmos', adjustable (1 per divider) PE125 knee rail, length 1.00 Mtr. (stall width 110-115 cm) PE125 knee rail, length 1.07 Mtr. (stall width from 115 cm) PE125 knee rail, length 1.25 Mtr. (last knee rail, from divider to end wall) End coupling for knee rail PE125 (attachment knee rail at end wall) Floor anchor M10 x 71 mm (2 per end coupling) Quick...

Open the catalog to page 11
Resting - 12

Stall width 115-120 center to center Model 'Comfort-NG' for cows mounted to 60 mm support post Stall width 115-120 center to center Special model for deep bedding freestalls ® 00 31 (0)512 - 369160 E-mail: sales@spinder.nl Website: spinder.nl

Open the catalog to page 12
Resting - 13

Waved neck rail The wave of the neck rail guides the animal to the centre of the cubicle, where she will stand up and lie down. This will make the animal lie straighter with less manure left in the stall. Flexible assembly results in the ideal dimensions. Many cubicles are too small (too narrow, too short, too low) for today's large cows. The waved neck rail makes better use of the space in the front of the stall. The wither height of the stall can be increased by as much as 30 centimetres. Through its shape, the attachment point of the waved neck rail lies further to the back; that makes...

Open the catalog to page 13

All Spinder Dairy Housing Concepts catalogs and technical brochures

  1. Attention

    10 Pages

  2. Cow traffic

    16 Pages

  3. Drinking

    10 Pages

  4. Eating

    24 Pages