Razor P Mulcher

Razor P Mulcher

Razor P Mulcher

Product catalog summary
Overview: The Razor P and Razor PSE are side mulchers designed for weed control on ditches, road verges, and meadows. They are suitable for tractors with a maximum horsepower of 110 HP (81 KW).
Specifications:
  • Maximum horsepower: 110 HP (81 KW)
  • Rotor speed: 2278 rpm (for 540 rpm PTO)
  • Tip speed: 52.5 m/s
  • Side transmission with 4 belts
  • Three-point hitch cat. 2 with self-aligning hinge and mechanical shock absorber
  • Fixed front and upper counter-blades
  • Rear roller diameter: 194 mm
  • Side-shift and tilt adjustment with hydraulic rams
  • Gearbox with freewheel safety device
  • Side-skids
  • Rotor with flat hammer (total diameter 430 - 440 mm)
  • Double shielded box frame
Models and Dimensions:
  • Razor P and Razor PSE models vary in total width, working width, and weight, with options ranging from 175 cm to 250 cm in working width and weights from 740 kg to 900 kg.
  • Razor PSE features an outer gearbox for additional side-shift movement.
Features:
  • High versatility for various applications due to specific tractor adjustments.
  • Hydraulic controlled tilt mechanism allows operation in non-horizontal positions, suitable for road verges or ditches.
  • Vertical position ranges from 90° to -65°.
  • Safety system for self-alignment and obstacle navigation.
  • Lockable in vertical position for road transport.
Optional Accessories:
  • Y shaped blades with straight blade
  • Drive shaft with wide-angle yoke
  • Wear-proof plates for side-skids
  • Additional shock-absorber with pressure relief valve
Standard and Optional Blades:
  • Standard: Flat hammer 1.55 kg
  • Optional: Y shaped blades with central straight blade
Manufacturer: Standen Engineering Ltd, located in Ely, Cambridgeshire, England, reserves the right to make changes to specifications, prices, or equipment without prior notice.
See more

Catalog excerpts

Razor P Mulcher-1

Suitable for weed control on ditches, road verges, and meadows. (0 6-7 cm) Total width ALSO AVAILABLE WITH OUTER GEARBOX

 Open the catalog to page 1
Razor P Mulcher-2

standen.co.ukAdjustment and dimension of cutting body Side mulcher models Razor P and Razor PSE can boast a high level of versatility. They are suitable for tractors up to 110 HP and can be used for a variety of applications. Due to its specific adjustment to the tractor it oofers a high degree of versatility In Razor PSE, the gearbox is fitted on the outside of the side transmission, allowing extra side-shift movement of the cutting body, while maintaining the correct working angle of the PTO shaft. The double arm (parallelogram type) allows the machine to work from central to an off-set position...

 Open the catalog to page 2
Razor P Mulcher-3

standen.co.uk LandWorker Series RAZOR PSE Fitted with outer gearbox

 Open the catalog to page 3
Razor P Mulcher-4

standen.co.uk LandWorker Series TECHNICAL SPECIFICATIONS OPTIONAL ACCESSORIES • Maximum horse power: 110 HP (81 KW) • Rotor speed: 2278 rpm (for 540 rpm PTO) • Tip speed 52.5 m/s • Side transmission with 4 belts • Three point hitch cat. 2 with self-aligning hinge and mechanical shock absorber • Fixed front and upper counter-blades • Rear roller Ø 194 mm • Side-shift and tilt (angle) adjustment with hydraulic rams • Gearbox with freewheel safety device • Side-skids • Rotor (Ø tube 168 mm) with flat hammer (total Ø 430 - 440 mm) • Foot stand • Double shielded box frame • Drive shaft without safety...

 Open the catalog to page 4
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.