Sigma E200 Power Harrows

Product catalog summary

Overview: The SIGMA E 200 is a fixed power harrow designed for agricultural use, with a maximum suggested horsepower of 200 HP (146 KW). It is part of the LandWorker Series by Standen Engineering Ltd.

Technical Specifications:

Maximum horsepower: 200 HP (146 KW)
2-speed gearbox for 1000 rpm PTO
3-point hitch category 2
Swinging lower linkages
Counter-plates for tines locking
Rear roller adjustment by pins
Rear levelling bar adjustment by threaded bar
Tines dimensions: 120x15x300 mm with a working depth of approximately 30 cm
Moveable side plates
Drive shaft with shear bolt

Optional Accessories:

4-speed gearbox for 540 rpm PTO
4-speed gearbox with rear PTO for 540 rpm tractor PTO
Oil cooling kit (not compatible with rear PTO)
Various rear rollers
Hydraulic adjustment for rear roller
Stone protectors kit for round rotor
Quick tines fitting kit
Wheel track eradicator tine
Rear hydraulic hitches for seed drill
Drive shaft with clutch safety device
PTO shaft with cam clutch

Quick Release System: The tines quick release system includes 3 holes tine, locking pins, and a tool for disassembling, designed to reduce maintenance time.

Design Features:

Oil sealing system with grooved section and double lip seal with steel casing
Forged steel bottom housing for durability
Stone protection system to safeguard rotors and prevent wear
Thick rotorshafts made of 39NiCrMo3
Double protection for bottom bearings

Dimensions and Weights:

Working widths range from 250 cm to 400 cm
Weights vary depending on roller type, ranging from 1050 kg to 1620 kg
Number of blades ranges from 20 to 32 depending on model

Company Information: Standen Engineering Ltd is based in Ely, Cambridgeshire, England, and maintains a policy of continuous product development, reserving the right to change specifications without notice.

Catalog excerpts

Quick release system Max suggested horsepower: 200 HP - 146 KW SIGMA E

Open the catalog to page 1

standen.co.uk LandWorker Series TECHNICAL SPECIFICATIONS OPTIONAL ACCESSORIES • Maximum horse power: 200 HP (146 KW) • 2 speed gearbox for 1000 rpm PTO • 3 point hitch cat.2 • Swinging lower linkages • Counter-plates for tines locking • Rear roller adjustment by pins • Rear levelling bar adjustment by threaded bar • Tines 120x15x300 mm: working depth approx. 30 cm • Moveable side plates • Drive shaft with shear bolt • 4 speed gearbox for 540 rpm PTO • 4 speed gearbox with rear PTO for 540 rpm tractor PTO • Oil cooling kit (when the machine is equipped with rear PTO, the oil cooling kit cannot...

Open the catalog to page 2

All Standen Engineering catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list