Sigma M80 Parrow Harrows

Product catalog summary

Overview: The SIGMA M is a fixed power harrow designed for soil cultivation in narrow spaces, ideal for use with compact tractors. It supports a maximum horsepower of 80 HP (59 KW).

Specifications:

Maximum horsepower: 80 HP (59 KW)
Rotor speed: 319 rpm (for 540 rpm PTO)
3-point hitch category 1
Rear roller adjustment by pins
Tines dimensions: 90x10x260 mm with a working depth of approximately 26 cm
Drive shaft with shear bolt
Welded safety protection

Dimensions and Weights:

Total Width (cm)	Working Width (cm)	Min. Horsepower (HP/KW)	Weight with Cage Roller (Kg)	Weight with Packer Roller (Kg)	Number of Blades
100	107	30/22	340	400	8
125	131	35/26	375	430	10
150	156	40/29	410	470	12
175	180	45/33	470	530	14

Optional Accessories:

4-speed gearbox for 540 rpm PTO
Rear rollers
Stone protectors kit for round rotor
Stone protectors kit with counterplates, round rotor
Setup for front rippers
Front ripper (wing type)
Front ripper (chisel type)
Rear levelling bar
Wheel track eradicator tine
Moveable side plate kit

Design Features: The SIGMA M features a robust frame made of two thick welded halves. The side plates are designed to prevent plant damage and are available in fixed or moveable versions to adapt to ground contours. It includes category 1 floating linkages at the front.

Manufacturer Information: Standen Engineering Ltd, based in Ely, Cambridgeshire, England, emphasizes continuous product development and reserves the right to modify specifications without prior notice.

Catalog excerpts

SIGMA M specifically designed for soil cultivation in narrow places. UNBEATABLE WHEN SPACE IS LIMITED!

Open the catalog to page 1

standen.co.uk LandWorker Series TECHNICAL SPECIFICATIONS • • • • • • • Maximum horse power: 80 HP (59 KW) Rotor speed: 319 rpm (for 540 rpm PTO) 3 point hitch cat.1 Rear roller adjustment by pins Tines 90x10x260 mm: working depth approx. 26 cm Drive shaft with shear bolt Welded safety protection OPTIONAL ACCESSORIES The SIGMA M is a unit specifically designed for soil cultivation in narrow places. It is particularly suitable for operation with the new generation of specialised compact tractors. 80 HP maximum is required to drive this unit. The frame is made of two thick welded halves. The side...

Open the catalog to page 2

All Standen Engineering catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list