ISOBUS FUNCTIONS. Ultimate Performance Premium Comfort Faster connectivity The unique STOLL ProfiLine ISOBUSConnected features take front loader and tractor work to a new level of comfort, user-friendliness and precision. 2

12 UNIQUE FUNCTIONS OF PROFILINE ISOBUSCONNECTED Pressure Regulation Load Independent Lowering Speed Adjustable Response Behaviour Electric Flow Sharing Bucket Shake Working Window Vibration Damping Electric Hydraulic Parallel Leveling The new STOLL ProfiLine ISOBUSConnected brings the full integration of the front loader into the tractor system. The new system settings, new level of comfort and higher safety standards. The ISOBUS standard unifies the communication between the tractor and the new Stoll's front loader. Thanks to it ISOBUSConnected front loader can be fully integrated into the...

PRESSURE REGULATION LOAD INDEPENDENT LOWERING SPEED Overload protection implement Pressure regulation Machine overload protection Pressure limitation on the bale grab application Load independent lowering This function enables the convenient and protective use of a bale grab and protects the plastic wrapping from damage, as the clamping force can be individually adjusted by pressure limitation. The control unit regulates the pressure in the 3rd function via the valve to a previously defined value. The same lowering and lifting speed regardless of the load. Pressure relief function, e.g. for a...

Defined movement sequence Simple operation More power Faster work Precise, recurring position Stress-free working Programmable movement sequences When the teach-in function is switched on, a movement sequence is saved. A complete movement cycle can be saved by running through it. When activated, the liftarm and the tool are controlled accordingly. This movement cycle for the liftarm and implement is repeated accordingly when activated. The operator defines a position to be approached. The position is approached by moving the boom and implement. The set position is saved and is approached automatically....

ADJUSTABLE RESPONSE BEHAVIOUR ELECTRIC FLOW SHARING Load-independent Adjustable response behaviour of the front loader High power Adjustable Response Behaviour Electronic volume splitting The aim is to increase comfort and enable material-friendly working. In order to meet the needs of the operator, the response behaviour can be defined independently and flexibly. The response behaviour defines the time from the joystick deflection to the full deflection of the control spool. The maximum possible pump volume is determined by the speed and displacement of the pump. If the desired volume flow is...

BUCKET SHAKE Load dependent Protection of the machine Improved comfort Adjustable frequency Clean emptying Work efficiency Complete emptying The aim of end position cushioning is to avoid a hard impact in the end position of the cylinder. A reference delay is calculated depending on the speed of the consumer. With this function, the approach to the end position is gentle yet dynamic. If material gets stuck in the bucket, the shaking function can be activated. The bucket is moved back and forth quickly and the material falls out. Sharp braking when reaching the end positions can be prevented....

WORKING WINDOW VIBRATION DAMPING Operator defined working range Reduced risk of accidents Improved manoeuvrability Working area Vibration Damping The aim is to adjust the end strokes electronically in order to avoid collisions or facilitate manoeuvrability. The permissible movement range of the front loader is determined by the electrical upper and lower end stroke. Reduces the movement of the vehicle on uneven road surfaces. The implement is used as a mass absorber by means of a switchable accumulator. The switchable accumulator dampens the vibrations of the vehicle body accordingly. It is possible...

ELECTRIC HYDRAULIC PARALLEL LEVELING Flexible position for weighing Travelling and weighing High accuracy Fewer mechanical components Highest precision Rapid dump function for quick emptying Electric Hydraulic Parallel Leveling (available only for FS loaders) Each implement is calibrated once and the corresponding data is saved. The attached implement can be selected accordingly by the operator. When the operator presses the button and the loader is in the measuring range (weighing range), the weighing process is started and the weight is calculated based on the pressure and geometry data. With...

The new era of front loaders is here. STOLL ProfiLine ISOBUSConnected ensures maximum integration of the loader into your tractor. TECHNICAL DATASHEET PROFILINE NEXT GENERATION ISOBUSCONNECTED Suitable for tractors with kW/hp Lifting force approx. in the implement's pivot point Lifting force (blade) approx. 300 mm before the pivot point Lifting force (pallet) approx. 800 mm before the pivot point Breakout force 800 mm before the pivot point 800 mm lift height in the implement's pivot Overloading height (H-210) Dump height Dump width Digging depth Pivot point of lifting arms Tilt angle Dumping...

SMARTER. FASTER. SELF-LEVELING MODELS FZ Connected to the tractor screen Control linked to the tractor joystick All 12 functions fully accessible over one connection on the tractor interface New level of comfort and higher safety standards Electronic hydraulic parallel guidance function (only for FS front loaders) Mechanic self-levelling Hydraulic self-levelling DIMENSIONS User-friendly visualized control and setting of front loader parameters via the tractor's integrated display. This functionality may vary depending on the specific tractor model.