We raise responsibility (to a new level) – The SOLID. Concise. Down-to-earth. Great design. That’s our SOLID. This lifting arm combines dynamic design with the best functionality, of course made in Germany. Count on the best as always. Count on STOLL. Please make sure to observe the correct allocation of the lifting arm to the console installed on the tractor; information in the installation instructions under number (...)

STURDY ELEGANCE. Our Solid. 4

Solid. The allrounder. A wealth of possible uses – this is what the new Solid offers you in eight different models: Suitable for your tractor between 45 and 135 hp, the front loaders are easy to operate and reliable. As always, STOLL has the right implements for your needs! Because the front loaders from the Solid range are particularly light in comparison, they perform best, for example, in hilly terrain. And: They are suitable for numerous used tractors – because STOLL is in tune with its customers from all generations. Many family-run farms and farmers working as sideline enterprises are thrilled...

The SOLID is a real hit with second-hand tractors. A light weight with strong performance characteristics and virtually infinite possible uses. A chic design with a top price-performance ratio.

MECHANICAL PARALLEL LINKAGE THE SAME DRIVE-IN SYSTEM AS WITH PROFILINE FRONT LOADERS EXCELLENT TILT AND DUMPING ANGLE LOW TARE WEIGHT IMPROVED PERFORMANCE CHARACTERISTICS MODERN LOOK OPTIONAL MACHINERY AND EQUIPMENT: HYDRO-FIX UPPER PART, 3RD + 4TH PILOT CIRCUIT AND COMFORT DRIVE SPECIAL PAINT FINISH AVAILABLE

Best performance in terms of lifting power and height. Top values in stability and loading speed. Comfortable to operate: the Solid was specifically developed to fulfil all the needs of professionals. High performer. Curved wonder. We love all the doers out there. Including those who live out their dreams and passion every day with the help of our products. Semi-professionals, part-time and hobby farmers find SOLID to be the ideal partner when it comes to lifting, grabbing or loading. And of course Made in Germany. Our SOLID helps tractors between 45 and 135 hp release their full power. Because...

The STOLL front loader can be attached and detached in just a few simple steps. This is facilitated by the tool-free supporting devices and the hydraulic connection that can be coupled under pressure.

Ready to use in under two minutes: A marvel of generations Drive-in system. 1 When driving in, the front loader slides along the attachment component until the locking pin meets the upper end of the connection support. The locking lever is pressed downwards and the front loader securely held in position on the attachment component. Then the front loader is raised higher. For more than three decades, customers have been able to attach STOLL front loaders With the Hydro-Fix all hydraulic lines can be connected to the tractor at the same time. The front loader is lifted slightly to hold the locking...

Gentle in the saddle with Comfort-Drive. Smooth driving even on bumpy terrain – thanks to the Comfort Drive damping system • Whether on roads or fields: Comfort Drive can be used wherever the ground is uneven. Our Comfort Drive is particularly helpful in eliminating impacts with very low bumpy ground conditions and fast journeys on roads. • This accessory feature reduces the impact of the loader and implement – protecting the vehicle. The driver’s back is also very grateful. • Good to know: The hydraulic accumulator is installed between the lifting arms and the lift cylinder, so it is completely...

The Comfort-Drive is protected between the drive-in column and the lifting arm bar. It can be switched on and off with the stopcock. Nitrogen bubble Drive-in column

The implement under control. Attaching the implement… just a quick pit stop. Drive in and hook the implement in. Tilt the implement – the locking mechanism automatically slots into place. Plugging in the hydraulic connection

Tilt angle Third pilot circuit Dump angle 46° Nothing falls out: Thanks to the excellent tilt angle, there are no trickle losses when loading. Then the bucket is completely empty – the dump angles for the implement provide efficient results. All implements with the Euro-mount fit with the Euro quick release frame. The Skid Steer quick release frame provides a clear view of the implement – ideal when working with the bale spike or pallet fork. Using hydraulic implements effectively – thanks to the third pilot circuit, there is no need for an additional control unit. STOLL’s tilt and dump angles...

The range of implements – the perfect addition to Solid. In addition to the day-to-day business on an emotive level, many of our customers also have a sound knowledge of numbers, data and facts. We will gladly offer you the transparency of info you need. Pallet fork – loading pallets made easy. Thanks to its sturdy construction, you can lift up to 1.000 kg at a time with the pallet fork. Adjust the distance between the pallet tines to suit your needs. Order no. Pallet fork 3567980 Frame 3567990 Pallet tines (details per piece) 3570700

Wrapped bale handler - so your wrapped bales do not get damaged. The wrapped bale handler does not have any sharp edges and was specially developed for transporting and loading wrapped bales. For round bales 0 from 0.80 m to 1.40 m, 3rd pilot circuit required Light weight bucket - ideal for light to medium duty use. You can even load your loose bulk goods well with it. Bale spike - one spike for all bales. Use the bale fork to transport round and square bales safely with ease. Depending on the application, the tines can be set in 4 positions in the frame. The bale spike was developed for handling...

Suitable for tractors with kW/hp Lifting force below in the Implement's pivot point above Lifting force (blade) below 300 mm before the pivot point above Lifting force (pallet) below 900 mm before the pivot point above before the pivot point Maximum lift height in the implement’s pivot point Dump height Dump width Digging depth Pivot point of lifting arms Tilt angle below Dump angle above Pump output rate Stroke time Tilting time, implement below Dumping time, implement above Weight, lifting arms without implement The values given are averages. Depending on the type of tractor, these values may...