CATTLE CHUTE 1100H

Product catalog summary

Overview
The Stronghold 1100H Cattle Chute is a robust piece of equipment weighing over 4,000 pounds. It is designed for ease of use with no manual adjustments required for handling different sizes of cattle, from calves to bulls. The chute is engineered for quick transportation, featuring a wheel-ready design that allows it to be moved in minutes. It incorporates poly wear points to enhance durability and reduce noise.

Safety Features
The chute includes headgate and end gate shields that extend beyond the door opening, minimizing the risk of injury to operators and bystanders. The hydraulic operation of the headgate, bi-fold rear gate, squeeze, and head sweep ensures efficient handling of cattle.

Standard Equipment

Both sides of the chute open fully.
Six swing-out, removable branding doors.
Fold-down, removable foot doors.
Palpation cage doors that track with sides.
11-inch neck access opening behind the headgate.
Removable side restraining rails and breast bar.
Swing arm controls accessible from either side.
Reversible head sweep.
Spring-loaded latches.
30-inch wide, 11-inch narrow squeeze.
Replaceable wear points and pins.
Headgate opens to 28 inches and closes to 3.5 inches.
Vertical, parallel movement of sides without forward or rearward motion.
Equipped with 16-inch 10-ply tires and a ball coupler.
Commercial duty winches and options for electric or gas power units.
Fiberglass rump bar.

Optional Equipment

Branding doors with optional blinders.
Scales for precise measurements.

Dimensions

Overall Length: 134 inches (148 inches with head sweep).
Overall Width: 65 inches (30 inches inside).

Contact Information
For more information, contact Stronghold Mfg at 405 East Margaret Street, Earlville, IA 52041. Phone: 563-923-2003 or Toll-Free: 800-422-3561. Email: [email protected].

Note: Specifications and designs are subject to change without notice.

Catalog excerpts

405 East Margaret Street Earlville, IA 52041 Toll Free: 800-422-3561 Phone: 563-923-2003 www.strongholdmfg.com SIDE VIEW OVERVIEW Chute weighs in excess of 4,000 pounds. No hand adjustments needed from the smallest calves to the largest bulls. No hoses or cylinders below the floor. Chute is wheel ready and designed to transport in minutes. Poly wear points to maximize life, minimize wear and noise. HEAD GATE Headgate and end gate shields extend out past door opening width, no risk of injury to operator or bystanders. Chute has hydraulic operation of headgate, bi-fold rear gate, squeeze and head sweep. . WHEEL ASSEMBLY 2014 Stronghold

Open the catalog to page 1

1100H STANDARD EQUIPMENT - Both sides open fully - 6 swing out, removable branding doors - Fold down. removable foot doors - Palpation Cage doors track with sides - 11” Neck access opening behind headgate - Removable side restraining rails - Removable breast bar - Swing arm controls either side - Reversible head sweep - All latches are spring loaded 30” wide, 11” narrow squeeze - All wear points & pins are replaceable - Headgate opens to 28”, closes to 3-1/2” - Vertical, parallel movement. No forward or rear-ward movement of sides - 16” 10-ply tires - Ball coupler - Commercial duty winches -...

Open the catalog to page 2

Stronghold™ Mfg 405 East Margaret Street Earlville, Iowa, 52041 © 2014 Stronghold™ Mfg., LLC. Stronghold™ reserves the right to make changes in pricing, design and specifications without notice or obligat

Open the catalog to page 3

CATTLE CHUTE 1100H

CATTLE CHUTE 1100H

Catalog excerpts

All Strongholdmfg catalogs and technical brochures