CONTROLLED ENVIRONMENT SYSTEMS FOR FARM BUILDINGS
4Pages

{{requestButtons}}

Catalog excerpts

CONTROLLED ENVIRONMENT SYSTEMS FOR FARM BUILDINGS - 1

CONTROLLED ENVIRONMENT SYSTEMS FOR FARM BUILDINGS FARM BUILDING VENTILATION FARM PRODUCTS DIVISION MEMBER OF AMCA AMERICAN COOLAIR CORPORATION BOX 2300, JACKSONVILLE, FL 32203 Phone (904) 389-3646 Fax (904) 387-3449 E-MAIL – agfans@coolair.com WEBSITE – www.coolair.co

Open the catalog to page 1
CONTROLLED ENVIRONMENT SYSTEMS FOR FARM BUILDINGS - 2

MEANS PERFORMANCE WITHALLGALVANIZED NCF FANS Now you can buy Coolair quality and our unique blade design at a savings to you and your customers. The NCF Fans are the answer to your ventilation requirements. We utilize our innovative drive assembly which applies power through V-belts directly to the propeller. Blade load is concentrated directly over the bearings for more economical operation and longer bearing life. Performance and efficiency are the keynotes to the Coolair NCF Fans. Our use of quality materials and precise engineering techniques in constructing blade assemblies assures you...

Open the catalog to page 2
CONTROLLED ENVIRONMENT SYSTEMS FOR FARM BUILDINGS - 3

PERFORMANCE RA TINGS The performance ratings listed below (Item numbers 1-13) were obtained through testing by the Bioenvironmental and Structural Systems Lab (BESS Lab) at the University of Illinois. All fans were tested with a shutter and discharge guard, and some may also include an optional discharge cone as noted in the fan description. The fan housing was mounted flush to the test chamber face, as in an actual building installation. Power measurements were taken on the fan/motor combination and include motor efficiency and drive losses. NCF FAN, SLOPE WALL HOUSING, INLET SHUTTER &...

Open the catalog to page 3
CONTROLLED ENVIRONMENT SYSTEMS FOR FARM BUILDINGS - 4

DIMENSIONS AND DRAWINGS TYPE NCF FANS TYPE NCF FANS in WAFERWOOD FRONT VIEW SIDE VIEW FRONT VIEW TYPE NCF FANS in SWH (SLOPE) WALL HOUSING FAN MODEL TYPE NCF FANS in SWHC (SLOPE) WALL COLLAR WITH CONE SIDE VIEW FRONT VIEW Rough Opening: SIDE VIEW FRONT VIEW CAUTION DO NOT INSTALL FAN WITH MOVING PARTS WITHIN 8 FEET OF FLOOR OR GRADE LEVEL WITHOUT A GUARD THAT COMPLIES WITH OSHA REGULATIONS. DO NOT USE UNLESS ELECTRICAL WIRING COMPLIES WITH ALL APPLICABLE CODES. DO NOT WIRE WITHOUT PROVIDING FOR A POWER SOURCE DISCONNECT AT THE FAN ITSELF. DO NOT SERVICE EXCEPT BY A QUALIFIED MAINTENANCE...

Open the catalog to page 4

All Sturdy Built Manufacturing catalogs and technical brochures

  1. Tie Stall Barn

    20 Pages