Fans and Heaters

Product catalog summary

Overview: This document provides detailed specifications and performance data for various fans and heaters manufactured by Sukup Manufacturing Co. It includes airflow metrics, static pressure data, and dimensions for different fan models, as well as heater performance metrics.

Metric Specifications: The document lists certified airflows for centrifugal fans at 1750 RPM and 3500 RPM, measured in cubic meters per minute (m3/min). It provides static pressure data in millimeters of water and outlines the performance across different kilowatt (kW) ratings.

Heater Specifications: The document details the maximum heat output for centrifugal heaters, categorized by temperature rise and fan kilowatts. It specifies high, low, and super low-temperature models with corresponding kilocalories per hour (Kcal/HR).

Fan Comparisons: A comparison chart is provided to assist in selecting the appropriate fan type based on static pressure and airflow requirements. It includes axial, centrifugal, high-speed centrifugal, and in-line centrifugal fans.

Airflows for Aeration Applications: The document includes airflow data for aeration applications, specifying static pressure and airflow for different fan diameters and kilowatt ratings.

Axial Fan Specifications: Certified airflows for axial fans are provided, with data on static pressure and airflow for various models and diameters.

Dimensions: Detailed dimensions for axial fans, centrifugal fans at 1750 RPM and 3500 RPM, and in-line centrifugal fans are included. These dimensions are crucial for installation and compatibility with existing systems.

Recommendations: The document emphasizes the importance of matching the fan to the system and suggests consulting with dealers and using the Sukup Airflow and Drying Rates Program for optimal equipment selection.

Note: Sukup Manufacturing Co. advises that specifications are estimates and not warranties, as continuous product improvements may lead to changes not reflected in the document.

Catalog excerpts

Different types of fans are designed for different operating situations. It is important to match the fan to your system. The chart below is designed to help in the decision making process by comparing different fan types at various static pressures. Your dealer can also help you make the right choice with their knowledge and the assistance of the Sukup Airflow and Drying Rates Program. Airflows for Aeration Applications - m3/min. Certified Airflows* for Axial Fans - m3/min. *Sukup Manufacturing Co. certifies that the airflow for the fan models above has been determined by an INDEPENDENT airflow testing laboratory. Static Pressure - millimeters of water *Sukup Manufacturing Co. certifies that the airflow for designated fan models has been determined by an INDEPENDENT airflow testing laboratory. Airflows for Low Speed Axial Fans - m3/min. Axial Fan and Heater Dimensions - centimeters 30.5 35.6 45.7 61 61 66 71.1 71.1 96.5 111.7 Airflows for 3500 RPM Centrifugal Fans - m3/min. Static Pressure - millimeters of water Sukup Manufacturing Co. provides this information to assist you in choosing the optimal equipment for your situation. Sukup specifications should only be used as estimates, and not as a warranty, express or implied, of how a particular Sukup unit will perform under your operating conditions. Because we are continuously improving Sukup products, changes may occur that may not be reflected in the specifications.

Open the catalog to page 1

1750 RPM Centrifugal Fan Dimensions - centimeters Airflows for In-Line Centrifugal Fans - CFM 3500 RPM Centrifugal Fan Dimensions - centimeters *Heavy-Duty (HD) transitions are made of 14 gauge galvanized steel. They are narrower to fit between stiffeners on stiffened bins and for aeration tunnels.

Open the catalog to page 2

All Sukup Mfg Co catalogs and technical brochures

Archived catalogs

Single To 3 Phase
1 Page