Introduction
Sukup Manufacturing Co provides guidance for selecting the appropriate tower dryer equipment, emphasizing that performance can vary based on several factors such as grain variety, maturity, cleanliness, weather, and management practices. The specifications provided are estimates and not guarantees of performance.

Specifications Overview
The document outlines the estimated capacities of various Sukup tower dryer models, specifically for drying US #2 Yellow Corn from 20%-15% and 25%-15% moisture content. These estimates are based on drying principles, field results, and computer simulations under specific conditions (10°C ambient temperature and 60% humidity).

Capacity Estimates
For models U1212 to U2412, the capacity ranges from 18.3 to 36.6 metric tonnes per hour for 25%-15% moisture reduction. For models U3018 to U7024, the capacity ranges from 45.7 to 106.7 metric tonnes per hour for the same moisture reduction.

Heat and Airflow Specifications
The document provides detailed specifications on heat holding, cool holding, total holding capacities, drying airflow, burner capacity, and average heat output for each model. For example, the U1212 model has a drying airflow of 1764 CMM and a burner capacity of 3391 Kcal x 1000.

Power and Structural Specifications
Blower power requirements and AC drive metering power are specified, with blower kW ranging from 45 to 93 across different models. The grain column height is consistently 32 cm, while tower diameter and overall height vary by model.

Conclusion
The document emphasizes that Sukup specifications are subject to change due to ongoing product improvements and should be used as estimates rather than definitive performance guarantees.