X44
X44
1. Company and Document Overview
This technical document from Sulky-Burel, dated January 2014, serves as a comprehensive parts catalog for agricultural machinery models with capacities of 2400, 3200, and 4000 liters. It provides detailed listings of mechanical, hydraulic, and electronic components, including part codes, specifications, and quantities, facilitating maintenance, repair, and assembly.
2. Contact and Identification
- Manufacturer: Sulky-Burel, France
- Reference: 400 338 - 03 EU / CD
- Models Covered: 2400, 3200, 4000 L capacity machines
3. Document Structure and Main Sections
The catalog is organized into clearly defined sections identified by letter codes, each corresponding to specific machine subsystems:
- A - Chassis (FRAME): Structural components including chassis types, pins, axles, fasteners, and reinforcements.
- B - Hopper (TREMIE): Hopper parts such as low/high sections, plugs, screws, washers, and inspection kits.
- C - Dosage Calibration System (DOSAGE): Dosing plates, flaps, springs, joints, and guides for precise material measurement.
- D - Shutter Control (COMMANDE DE TRAPPES): Hydraulic and electronic components controlling trap doors, including cylinders, seals, springs, and Stop & Go system parts.
- E - Spreading (EPANDAGE): Spreading plates, brushes, anti-rebound systems, levers, and plastic sectors for flow regulation.
- F, G - Transmissions and Electric-Electronic Kits: Referenced but detailed parts not fully included.
- H - Stickers (AUTOCOLLANTS): Safety and identification labels.
4. Parts Specifications and Materials
- Fasteners: Predominantly stainless steel (A2 70) screws, nuts, washers, rivets for corrosion resistance and durability.
- Plastics: Nylon (pa66) washers, polyamide spacers, and plastic sectors used for wear resistance and flexibility.
- Hydraulic and Electronic Components: Cylinders, valves, electric actuators, wiring harnesses, connectors (AMP 4-pin), electronic control boxes, sensors (progress, ILS, speed), and GPS antennas.
- Mechanical Parts: Bearings, shafts, gears, pins, clips, rivets, springs, seals, handles, and agitator rods.
5. Technical and Assembly Notes
- Use of stainless steel fasteners and nylon lock nuts ensures mechanical integrity and vibration resistance.
- Clear categorization by subsystem aids in ordering and maintenance.
- Electrical components require proper connectors and wiring harnesses for safety and compatibility.
- Anti-rebound and spreading system parts optimize material distribution.
- Labels and safety markings support compliance with operational standards.
6. Detailed Component Highlights
Blade Kits and Assemblies
- Multiple blade kits categorized by size and type, including standard, long, and 3D tribord blades for various applications.
Mechanical Components and Fasteners
- Wide range of pins, levers, handles, washers, screws, nuts (including nylon lock nuts), bearings, and friction discs.
- Specialized kits such as anti-rebound cloth and chute cloth kits.
Electrical and Electronic Components
- Wiring harnesses, 12V power cables, connectors, electric cylinders, vision consoles, sensors, electronic control boxes, and GPS antennas.
Structural and Support Parts
- Chassis parts, support stands, reduction gears, agitator shafts, and reinforcements.
Measurement and Testing Equipment
- Containers, crosspieces, test tube supports, funnels, and granulometers for material testing.
Labels, Stickers, and Safety Markings
- Adhesive labels, reflective plates, warning stickers, color-coded ties, and paint products for maintenance and identification.
Fastener Details
- Extensive listing of screws, bolts, washers, and nuts with precise dimensions, material grades, and finishes.
- Head types include hex, countersunk, and socket heads with thread sizes from M4 to M16 and lengths from 6mm to 150mm.
7. Critical Information and Best Practices
- Use stainless steel A2 70 fasteners for corrosion resistance and mechanical strength.
- Select blade kits appropriate to size and application (standard, high resistance, 3D tribord).
- Follow recommended assembly procedures using specified pins, washers, and lock nuts to ensure mechanical integrity.
- Connect electrical components using designated connectors and wiring harnesses to guarantee compatibility and safety.
- Apply appropriate labels and safety markings to comply with operational and safety standards.
8. Summary
This document is a detailed and structured parts catalog essential for technicians and engineers involved in the maintenance, repair, or assembly of Sulky-Burel agricultural machinery. It emphasizes precise part identification, material specifications, and subsystem categorization to facilitate efficient procurement and ensure operational reliability.
Catalog excerpts
Les Portes de Bretagne P.A. de la Gaultière – 35220 CHATEAUBOURG France Tél :(33)02-99-00-84-84 · Fax : (33)02-99-62-39-38 Site Internet : www.sulky-burel.com E-Mail : [email protected] Adresse postale SULKY-BUREL – CS 20005 – 35538 NOYAL SUR VILAINE CEDEX
Open the catalog to page 1
CHASSIS FRAME RAHMEN TREMIE HOPPER DÜNGER-BEHÄLTER DOSAGE CALIBRATION SYSTEM DOSIERUNG
Open the catalog to page 2
COMMANDE DE TRAPPES SHUTTER CONTROL SCHIEBERBETÄTIGUNG EPANDAGE SPREADING STREUUNG
Open the catalog to page 3
KITS ELECTRIQUES - ELECTRON IQUES ELECTRIC-ELECTRONIC KITS
Open the catalog to page 4
H AUTOCOLLANTS STICKERS AUFKLEBER
Open the catalog to page 5
Chassis dpx cd so Chassis dpx cd pesee so Broche de parallelogramme Axe tete plate d28 l137 Goup clips d10 zn 6 c fe s32 Lien noir s29150 ref 715010 Vis h 10x100 inox a2 70 fp Rondelle m10 n inox a2 70 Ecrou frein nyl h10 inox a2 70 Bouchon 120x120 Indicateur niveau ad Vis h 8x25 inox a2 70 fp Ecrou h8 inox a2 70 Bequille dpx ad Vis h 16x40 inox a2 70 fp Rondelle m16 n inox a2 70 Ecrou frein nyl h16 inox a2 70 Patin de poutre renvoi ad Rondelle m8 n inox a2 70 Ecrou frein nylon h8 inox a2 70 Protection de renvoi Deflecteur central g dpx cd so Deflecteur central d dpx cd so Deflecteur ext g dpx...
Open the catalog to page 6
Chassis de pesee so Cale de ressort pesee Platine taraudee de pesee Rondelle m16 n inox a2 70 Butee de securite ad Vis h 12x35 inox a2 70 fst Rondelle m12 n inox a2 70 Ecrou frein nyl h12 inox a2 70 Ressort jaune d32x16x89 Vis chc 16x110 classe 12 9 Vis h 20x30 inox a2 70 Vis sthc 6x10 bout cuvette Carter protect fil peson ad Vis trcc 8x40 inox a2 70 fst Rondelle m8 n inox a2 70 Ecrou h8 inox a2 70 Ecrou frein nylon h8 inox a2 70 Lames de pesee as
Open the catalog to page 7
Patin roue ad so Vis h 10x30 inox a2 70 fp Rondelle m10 n inox a2 70 Ecrou frein nyl h10 inox a2 70 Chape roue pivotante so Rondelle roue farmflex unid t Goup clips d4 5 zn 6 c fe s32 Roue remisage 200x50 Axe de traceur so Poignee de cmde h8x45 inox as Bouchon d9 gpn 300 f041 nat Axe de roue ad so Rondelle m16 n inox a2 70 Ecrou frein nyl h16 inox a2 70 Goup elastic 6x35 inox Axe de remisage roue av ad Rondelle m8 n inox a2 70 Ecrou frein nylon h8 inox a2 70
Open the catalog to page 8
Tremie basse cd so Vis h 10x140 inox a2 70 fp Rondelle tremie x Rondelle tremie x tronquee Rondelle m10 n inox a2 70 Ecrou frein nyl h10 inox a2 70 Vis h 12x35 inox a2 70 fst Rondelle m12 n inox a2 70 Ecrou frein nyl h12 inox a2 70 Rondelle epaisse 12x36 Vis trcc 10x35 inox a2 70 fp Vis trcc 8x16 inox a2 70 Rondelle m8 n inox a2 70 Ecrou frein nylon h8 inox a2 70 Bouchon d9 gpn 300 f041 nat Tremie haute cd so Vis h 8x25 inox a2 70 fp Rondelle nylon pa66 8 Vis h 10x30 inox a2 70 fp Bouchon d16 gpn 300 f15 nat Bande adhesive 1 face au m Kit hublot sulky ovale as
Open the catalog to page 9
Bache dpx cd Attache caoutchouc Vis trcc 8x30 inox a2 70 Ecrou hm 8 inox a2 70 Rondelle m8 n inox a2 70 Ecrou frein nylon h8 inox a2 70 Traverse fix bache dpx bd Flasque de bache dpx cd Vis h 8x16 inoxa2 70 fst Bras bache dpx cd Vis h 10x50 inox a2 70 fst Rondelle m10 n inox a2 70 Entretoise nylon d10 5xd30x13 Entretoise nylon d10 5xd15x10 Ecrou frein nyl h10 inox a2 70 Vis trcc 8x40 inox a2 70 fst Bielle bache dpx bd Rondelle nylon pa66 8 Levier bache dpx bd Tube bache mx Vis trcc 8x50 inox a2 70 Amortisseur bache lx dx Rondelle ll8 n inox a2 70 Agrafe rapide vr22 inox
Open the catalog to page 10
Rehausse long cd Vis h 8x25 inox a2 70 fp Rondelle m8 n inox a2 70 Rondelle nylon pa66 8 Ecrou frein nylon h8 inox a2 70 Rehausse larg cd Coin reh moule dpx ad Bande adhesive 1 face au m Tamis cd so Vis h 8x25 inox a2 70 fp Rondelle ll8 n inox a2 70 Ecrou h8 inox a2 70 Poignee de cmd large h8 inox as Pivot butee tamis ad Vis trcc 6x15 inox a2 70 Rondelle l6 n inox a2 70 Ecrou frein nylon h6 inox a2 70 Support tamis plastique Vis cbl z st3 5x9 5 inox a2 70 Toit anti tassement dpx so Rondelle m16 n inox a2 70 Goup d6 clips zn 6 c fe s37 Lien noir s29150 ref 715010
Open the catalog to page 11
DÉSIGNATION Support arceau g dpx ad Support arceau d dpx ad Vis h 8x25 inox a2 70 fp Rondelle ll8 n inox a2 70 Rondelle m8 n inox a2 70 Ecrou frein nylon h8 inox a2 70 Arceau central dpx cd Vis h 8x50 inox a2 70 fp Arceau exterieur dpx ad Collier fixation arceau dpx ad Vis trcc 8x70 inox a2 70 Ecrou h8 inox a2 70 Support deflecteur g dpx cd Support deflecteur d dpx cd Vis h 8x65 inox a2 70 fp Pare boue sup g dpx cd Pare boue sup d dpx cd Rivet struct d6 4 inox ep3 5a6 Pare boue inf g dpx cd Pare boue inf d dpx cd Rivet struct d6 4 inox ep8 5a11 Pareboue caoutchouc x44 Barre pareboue caoutchouc...
Open the catalog to page 12
Vis trcc 6x15 inox a2 70 Bague plastique ng Butee trappe ad g so Rotule ad Ecrou hm 8 inox a2 70 Vis trcc 8x80 inox a2 70 Rondelle ll8 n inox a2 70 Poignee de cmd large h8 inox as Poignee reglage ad Indicateur dosage g ad Vis trcc 8x25 inox a2 70 Ecrou frein nylon h8 inox a2 70 Goupille v 3 2x18 inox Secteur plastique debit g ad Appui de secteur ad Ecrou frein nylon h6 inox a2 70 Butee trappe ad d so Indicateur dosage d ad Secteur plastique debit d ad
Open the catalog to page 13
Fond doseur g ad so Rondelle m8 n inox a2 70 Support trappe g ad so Trappe debit g ad Ressort trappe Fond doseur d ad so Joint fond doseur ad Vis trcc 6x25 inox a2 70 Vis trcc 6x15 inox a2 70 Rondelle l6 n inox a2 70 Ecrou h6 inox a2 70 Support trappe d ad so Articulation trappe ng Trappe debit d ad Vis h 10x50 inox a2 70 fst Rondelle l10 n inox a2 70 Rondelle m10 n inox a2 70 Ecrou frein nyl h10 inox a2 70 Guide trappe ad
Open the catalog to page 14
Goulotte essai de debit ad so Poignee de cmde hm8 inox as Toile essai debit ad Rivet aveugle inox 4x8 Rondelle l4 n inox a2 70 Seau debit avec couvercle Reglette debit serie x fr cd Reglette debit serie x gb cd Reglette debit serie x de cd Reglette debit serie x ru cd Support goulotte debit ad Vis trcc 8x25 inox a2 70 Rondelle m12 polyamide Rondelle m8 n inox a2 70 Ecrou frein nylon h8 inox a2 70
Open the catalog to page 15
Cmd teleflexible g et d 4m mo Boitier g cmd teleflexible mo Boitier d cmd teleflexible mo Teleflexible cmd trappe 4m mo Ressort boitier de commande Traineau boitier de commande Levier boitier de commande Soufflet teleflex cmd trappes Support commandes so Vis h 6x20 zn 6 c fe fp Glissiere support cde Vis h 8x35 zn 6 c fe fp Ecrou h8 zn 6 c fe Embout cable dpx Vis h 8x45 inox a2 70 fst Ecrou h8 inox a2 70 Rondelle ll8 n inox a2 70 Bride de blocage d 12 Ecrou h6 inox a2 70 Ressort trappe Laniere support flexible bd Vis trcc 8x30 inox a2 70 Ecrou frein nylon h8 inox a2 70
Open the catalog to page 16All SULKY-BUREL S.A.S catalogs and technical brochures
MASTER16 Pages
PROGRESS40 Pages
CULTILINE20 Pages
XT16 Pages
Product range36 Pages
X40+69 Pages
X4062 Pages
DX30 - DX30+54 Pages
DX20 - DX20+45 Pages
X3638 Pages
DPX 2842 Pages
DPX 2437 Pages
DPX 1831 Pages
DPX Magnum52 Pages
GLX24 Pages
DPA XL16 Pages
DPX Expert49 Pages
DPX PrimaDPX 70 ans34 Pages
Monorotor RC11 Pages
Monorotor RV16 Pages
Monorotor R4 Pages
DPA Epandor S2537 Pages
DPX 0412 Pages
300 - 4004 Pages
S 2537 Pages
DRC, DRV32 Pages
DR15 Pages
- Seeder
- Vibro-cultivator
- Mounted vibro-cultivator
- Seed drill
- Nutrient applicator
- Vibro-cultivator with roller
- Solid fertilizer spreader
- Harrow
- Tractor-mounted fertilizer spreader
- Mechanical in line seeder
- Tractor-mounted seed drill
- Disc seed drill
- Field cultivator with hydraulic adjustment
- Air seed drill
- Harrow with roller
- Power harrow
- Seed drill with fertilizer applicator
- Towed fertilizer spreader
- Folding harrow
- Spring tine stubble cultivator