Catalogs >
SUMA Rührtechnik >
INDUSTRIAL AGITATORS

INDUSTRIAL AGITATORS
12Pages

Catalog excerpts

INDUSTRIAL AGITATORS

For mounting through the wall (MGD) or roof (GDD) TECHNICAL DATA OPTIMIX 2G / 3G 180 rpm 250 rpm Galvanized propeller, optional in hardend steel, ss304 or ss316 Bearing flange with mechanical seal SiC/SiC 3 seperated oil chambers for motor, gear and bearing flange Longlife-Oil within the gear and bearing flange PTC 130°C - thermistors (overheat protection) Guide support with 4 rollors for 80 x 80 to 150 x 150 mm masts Galvanical isolated to the mast through ss316-rope Delivery incl. microbe-resistant connect

Open the catalog to page 2

TECHNICAL DATA OPTMIX 2A / 3A 710 rpm Propeller in ss304, optional in ss316 Bearing flange with mechanical seal SiC/SiC 3 seperated oil chambers for motor, gear and bearing flange Longlife-Oil within the gear and bearing flange PTC 130°C - thermistors (overheat protection) Guide support with 4 rollors for 80 x 80 to 150 x 150 mm masts Galvanical isolated to the mast through ss316-rope Delivery incl. microbe-resistant connection cable Optimix 2A 135-280 and Optimix 2A 135-380 for Ex-zone 1 Optimix completely in V2A up to pH-value 5.5 Optimix completely in V4A up to pH-value 4.5

Open the catalog to page 3

GDD GASTIGHT CEILING LEAD THROUGH For mounting through the tank roof TECHNICAL DATA GASTIGHT CEILING LEAD THROUGH ·· ·· ·· ·· ·· ·· ·· ·· For tank heights up to 14 m and concrete roof Heavy version at mast heights 10 - 14 m Innovative gastight rope lead through Cable guidance behind the mast Base frame with dowels Lateral adjustment 360° Height adjustment through ss304-rope winch and ss316 rope Height indication for determining the exact height of the agitator within the tank Servicebox: Sealing plate: 1.870 x 1.070 x 3 mm in V4A Guide mast: 100 x 100 to 150 x 150 mm Maintenance unit...

Open the catalog to page 4

MGD GASTIGHT WALL LEAD THROUGH For mounting through the tank wall TECHNICAL DATA GASTIGHT WALL LEAD THROUGH For tank heights up to 14 m Heavy version at mast heights 10 - 14 m For steel and concrete tanks Innovative gastight rope lead through Cable guidance behind the mast Base frame with dowels Lateral adjustment up to 210° Height adjustment through ss304-rope winch and ss316 rope Optional SUMA-height indication to determine the exagt height of the agitator within the tank ·· Optional SUMA-angle display to determine the exact hotizontal angle of the agitator within the tank

Open the catalog to page 5

For mounting through the tank wall or roof Flow simulation: 4 Agitators at start Flow simulation: 4 Agitators after 5 minutes TECHNICAL DATA GIANTMIX FR SP ·· ·· ·· ·· ·· ·· ·· ·· ·· ·· ·· ·· ·· ATEX-motor with 11 | 15 | 18.5 | 22 kW (275 | 400 rpm) Low noise spur gear (i=5.31 or 3.69) Bearing flange with mechanical seal SiC/SiC Tube in ss304, oprional ss316: 3 or 4 m length Propeller-Ø 620 - 880 mm in hardened steel or ss304 Sealing membrane in EPDM 60 Installation depth up to 8 m below substrate level Horizontal inclination up to ± 25° Inclination through upper link PTC 150°C -...

Open the catalog to page 6

For mounting through the tank wall TECHNICAL DATA GIANTMIX FR light ·· ·· ·· ·· ·· ·· ·· ·· ·· ATEX-motor with 4 / 7.5 kW (180 | 250 / 280 | 380 rpm) Low noise spur gear (i=5.31 or 3.69) Bearing flange with mechanical seal SiC/SiC Tube in ss304, oprional ss316: 1 | 1.5 m length Propeller-Ø 520 - 700 mm in ss304, optional hardened steel Installation depth up to 6 m below substrate level Sealing plate with other angle of inclination on request PTC 160°C - thermistors (overheat protection) Oil equalizing container for monitoring the tightness ·· POM protective sleeve to prevent long fibrous...

Open the catalog to page 7

For mounting through the tank wall or roof TECHNICAL DATA GIANTMIX AMX ·· ·· ·· ·· ·· ·· ·· ·· ATEX-motor with 15 | 18.5 | 22 kW (80 rpm) Low noise spur gear (i=18) Bearing flange with mechanical seal SiC/SiC Tube in ss316: 4 | 5 | 6 m length Propeller-Ø 1,600 mm in ss304, optional ss316 Sealing membrane in EPDM 60 Installation depth up to 6 m below substrate level Sealing plate 1,430 x 1,730 mm optional right or left 25° preset, other ranges on request Vertical inclination through hydraulic cylinder + 5° / - 30° PTC 150°C - thermistors (overheat protection) Oil equalizing container for...

Open the catalog to page 8

For small tanks / container / lagoons TECHNICAL DATA REKORDMIX ·· ·· ·· ·· ·· ·· Motor with 4 kW (950 rpm) | 5.5 kW (1,450 rpm) Tube-Ø 70 x 3 mm in ss304 Tube lenghts 2.75 | 3.25 | 3.75 | 4.25 m Propeller-Ø 320 or 275 mm galvanized, optional in ss304 Shaft sealing ring Optional: -- Protective ring in ss304 -- Oil equalizing container for monitoring the tightness -- Bearing housing with mechanical seal SiC/SiC -- Pinion rack winch Motor with 4 kW (950 rpm) Propeller-Ø 320 mm Clamping unit with sealing membrane in EPDM 60 Agitator frame with vertical inclination adjustment Other points like...

Open the catalog to page 9

SUMA Rührtechnik GmbH Martinszeller Str. 21 DE - 87477 Sulzberg Phone: +49 8376 92 131 -0 Fax: +49 8376 92 131 -19 Mail: info@suma.de www.suma.de/EN YOUR LOCAL REPRESENTATIVE As per: 2019/11

Open the catalog to page 12

INDUSTRIAL AGITATORS 12Pages

Catalog excerpts

All SUMA Rührtechnik catalogs and technical brochures

INDUSTRIAL AGITATORS
12Pages