Catalogs >
SUMA Rührtechnik >
OPTIMIX 2G

OPTIMIX 2G
2Pages

Catalog excerpts

Submersible motor 3-blade high efficiency propeller, dynamically balanced Hardened steel, ss304 or galvanized Guide mast connection Guide mast support with 4 rollers for smooth height adjustment: 400 V, 50 Hz, special tension on request Protection class IP 68, up to 10 m submergence PTC thermistors 130°C for thermal protection for 4 / 9 kW: 80 / 100 / 120 mm square mast for 15 kW: 100 / 120 / 150 mm square mast High efficiency Own oil circulation, turbine oil Bearing Bearing flange with mechanical seal SiC/SiC Flange mounted planetary gear, 2 tapered roller bearings to absorb the axial forces Shaft of hardened steel Own oil circulation, longlife gear oil Bearing flange with separat oil chamber filled with Longlife gear oil Change oil after 10,000 operating hours or 4,000 operating hours for 2G 150 - 380 Accessory: POM protection to minimize abrasion Corrosion protection Ductile cast iron housing (GGG40) Agitator has a two component epoxy coating Agitator is galvanically isolated from the guide mast Pressed-on cable gland Star-delta switch fro 9 and 15 kW, soft start or frequency converter Standard length 10 m 7 x 4 + 4 x 1.5 mm2, ø 20 mm Resistant against biomass Strain relief 800 N Electric Cable

Open the catalog to page 1

Full load current [A] Gear reduction ratio Subject to technical changes * measured in water and 1.2 m distance As per: 2020-06 © SUMA Rührtechnik GmbH | Martinszeller Str. 21 | DE-87477 Sulzberg Phone: +49 8376 / 92131 - 0 | Fax: - 19 | info@suma.de | www.suma.de/en

Open the catalog to page 2

OPTIMIX 2G 2Pages

Catalog excerpts

All SUMA Rührtechnik catalogs and technical brochures

OPTIMIX 2G
2Pages