Catalogs >
SUMA Rührtechnik >
SUMA Giantmix AMT SL

SUMA Giantmix AMT SL
2Pages

Catalog excerpts

Application Long-axis agitator Dry matter content up to 14 % Substrate temperature up to 70°C pH-value 6.5 - 8.5 GIANTMIX AMT AMT6 220-270 AMT7 280-275 Bearing Bearing housing with oil chamber 2 tapered roller bearings to absorb the axial forces Mechanical seal SiC/SiC, independent of rotation direction Interim bearings for the drive shaft Technical data Tube length 5.0 m / 6.0 m / 6.5 m Tube 0 220 x 8 mm in ss316 15°-Sealing plate 143 x 143 cm in ss316 Sound pressure level 75 dB(A) Installation up to 6 m below substrate level Oil inspection glas for monitoring the tightness Agitator completely manufactured in modular design Propeller 3-biade high efficiency propeller, dynamically balanced AMT6 22.0 kW propeller MS 780 270 rpm Motor Power: 22 / 28 kW - 4-poles 400 V, 50 Hz, 1,475 rpm PTC thermistors 160°C as overheat protection Ex-Motor E II 3G Ex nA IIA T3 Gc Adjustment range Horizontal through pivoting frame ± 25° Sealing plate 15° optional right/left preset Vertical through hydraulic cylinder ± 30° Tank opening: 1,000 x 1,000 mm (plate 143 cm) Gear Spur gear drive, helical teeth, low noise level Reduction ratio i = 5.37 Oil chamber, gear oil SAE 85W-140 / API GL-5 Oil change after 2,000 operating hours Ex-zone Ex-Zone 2 (outside tank) and Zone 1 (inside tank) Classification mechanical C E II 2G Ex h IIA T3 Gb Soft start or frequency converter

Open the catalog to page 1

Gear reduction ratio Pumping rate Water [m3/min] Subject to technical changes * measured in water and 1.2 m distance © SUMA Rührtechnik GmbH | Martinszeller Str. 21 | DE-87477 Sulzberg As per: 2020-08 Phone: +49 8376 / 92131 - 0 | Fax: - 19 | info@suma.de | www.suma.de/en

Open the catalog to page 2

SUMA Giantmix AMT SL 2Pages

Catalog excerpts

All SUMA Rührtechnik catalogs and technical brochures

SUMA Giantmix AMT SL
2Pages