Catalogs >
SUMA Rührtechnik >
SUMA Giantmix Z3 for guide rail

SUMA Giantmix Z3 for guide rail
2Pages

Catalog excerpts

GIANTMIX Z3 FOR GUIDE RAIL Agitator tube and drive shaft Long-axis agitator for ring and slalom channels Tube Ø 100 x 3 mm, with 6 m Ø 101.6 x 4 mm, galvanized Drive shaft Ø 50 mm with multiple interim bearing and with both sided slip-on connection Tube ist filled with special oil ISO VG68, approx. 40 % Technical data Tube length 4.0 / 4.5 / 5.0 / 5.5 / 6.0 m Propeller 3-blade high efficiency propeller, dynamically balanced Optional guide rail with wall frame for easy insertion of the agitator Dimensions on request Agitator completely modular designed Galvanized, optional hardened steel or ss304 Bearing (drive side) Standard design with drive train HY for one rotation direction Power take off connection (PTO) 1-3/8“ (6-chock) Accessories Power-take-off (PTO) shaft W 2400 (L = 860) One-sided wide-angle PTO shaft WWE 2480 (L = 860) Optional reversing gear for two rotational directions Bearing head as own modular unit Lubrication by oil bath in the agitator tube Optional reversing gear for two rotational directions Bearings (propeller side) 2 tapered roller bearings to absorb the axial forces Sealing with shaft sealing rings, optional: mechanical sealing SiC/S

Open the catalog to page 1

GIANTMIX Z3 FOR GUIDE RAIL Dimensions E E .£ ■- 'e -E, Subject to technical changes * Calculated via CFD simulation and validated in test basin with water © SUMA Ruhrtechnik GmbH | Martinszeller Str. 21 | DE-87477 Sulzberg Phone: +49 8376 / 92131 - 0 | Fax: - 19 | info@suma.de | www.suma.de/en

Open the catalog to page 2

SUMA Giantmix Z3 for guide rail 2Pages

Catalog excerpts

All SUMA Rührtechnik catalogs and technical brochures

SUMA Giantmix Z3 for guide rail
2Pages