STRAKE
34Pages

{{requestButtons}}

Catalog excerpts

STRAKE - 1

2017 Operator Manual and Parts List 12m Strake Read this manual carefully prior to operating the machine and store with the machine. SUMO Serial No. :

Open the catalog to page 1
STRAKE - 2

EC DECLARATION OF CONFORMITY (RL 2006/42/EC) MANUFACTURER: Sumo UK Ltd ADDRESS: Redgates, Melbourne, York, YO42 4RG. COUNTRY: United Kingdom PRODUCT DESCRIPTION: Sumo STRAKE MODEL: 12m DATE: March 2015 This product conforms to all the essential health and safety requirements of the EC Directive 2006/42/EC This document is approved by: NAME: Mr. Shaun Wealleans POSITION: Technical Director SIGNATURE: PLACE: Sumo UK Ltd, Redgates, Melbourne, York, YO42 4RG, United Kingdom. DATE: March 2015

Open the catalog to page 2
STRAKE - 3

Machine Registration Warranty claims will NOT be accepted unless this machine registration form is completed and returned to the address below: Sumo UK Ltd Redgates Melbourne York YO42 4RG Serial number: …………………………………………………………………………………………………………….. Machine: ……………………………………………………………………………………………………………………… Model: …………………………………………………………………………………………………………………………. Delivery date: ………………………………………………………………………………………………………………. I confirm that I have received and read the Operator’s Manual for the machine written above and I have been instructed by a Sumo dealer or trained operative in the safe and correct...

Open the catalog to page 3
STRAKE - 4

In order to obtain your free pair of Sumo overalls and baseball cap please fill in this form and send back to us at: Sumo UK Ltd Redgates Melbourne York YO42 4RG Tel: 01759 319900 Fax: 01759319901 Overall Size Tick where applicable. Small (38 chest) Medium (42 chest) Large (46 chest) Extra-large (50 chest) XX Large (54 chest) XXX Large (58 chest) Position Farm Owner Farm Manager Farm Worker Farm type Arable Vegetable Livestock Mixed Farm Size 0-250ac 251-500ac 501-1000ac 1000+ac

Open the catalog to page 4
STRAKE - 6

Please read and ensure that these warnings are complied with. Prior to operating the machine, these instructions must be read and complied with. This will reduce the chance of injury, reduce the chance of machine misuse which could result in failure of parts and significantly reduce the service life of the machine. Sumo will not accept liability for any injuries or damage caused from failing to comply with the instructions within this manual. The designations “left”, “right”, “front” and “rear” refer to the direction of travel, as seen in the direction of travel, as the operator is sat in...

Open the catalog to page 6
STRAKE - 7

Incorrect set up of machine (hydraulic connections, non-even depth adjustment) Failing to comply with safety and operating instructions Neglect of maintenance of the machine. machine and familiar with the dangers of the machine. 4.2 Spares The machine has been designed to take Sumo manufactured spares; non-genuine parts may damage the machine as they are untested and not recommended for use with the Sumo machine. Sumo will not honour warranty claims if deemed to be caused by the use of non-genuine parts or accessories. 4.0 Safety and Responsibility The following warnings and safety...

Open the catalog to page 7
STRAKE - 8

sons intending on using the machine to ensure they are up to the required standards and ensure that they have read and understood this manual. 4.7 Personal Protective Equipment (PPE) To protect the user and persons surrounding the machine during operation suitable PPE must be worn. 4.4 Machine operators These persons have been trained by the owner or dealer to use and set up the machine in the field, transport the machine on the road, maintain the machine and troubleshoot errors with the machine. Tight fitting clothes or overalls should be worn to ensure no loose clothing is able to get...

Open the catalog to page 8
STRAKE - 9

planned should also be considered to ensure that the machine will fit under low bridges and between narrow gaps. will serve your safety. Before commencing work, make yourself familiar with all the equipment and controls as well as their functions. Keep the machine and in particular; any bearings clean to avoid risk of fire. The way in which the Sumo Strake is configured means the transportation wheels are at the very rear of the machine, meaning that it cuts corners, ensure that a wide swing is taken to tackle corners to prevent damage being caused to the machine or the machine fouling...

Open the catalog to page 9
STRAKE - 10

initial operation prior to an official commissioning of the machine that leads to damage of the machinery, or the serious/fatal injury to personnel/third party claimants will not be the responsibility of SUMO UK. It is highly recommended that prior to initial/daily use that nuts and bolts be checked and tightened appropriately on vital components to avoid unnecessary damage and or injury. 5.2 Retrofitting Structural changes and extensions can adversely affect the functionality and the operational safety of the machine. This can lead to severe or even fatal physical injuries.  Do not make...

Open the catalog to page 10
STRAKE - 11

down in the “work” position before uncoupling from the tractor. The machine should always remain secured to the tractor when the wings are anywhere between fully up and fully down. operator or any third party does NOT try to dismantle or adjust the accumulator in any way. If the accumulator fails it should be changed under the instruction of SUMO UK. 5.4 Hydraulic System The hydraulic system is under high pressure. Hydraulic oil escaping under pressure can penetrate the skin and cause serious injuries. In the event of injury, consult a doctor immediately. 5.6 Brake System Brake systems are...

Open the catalog to page 11

All Sumo UK Ltd. catalogs and technical brochures