Increasers I Reducers I Miter 100 Series include turf equipment, mowers, sprayers, grain augers and road and highway equipment. Two-piece aluminum housing for high strength, corrosion resistance and thermal capacity Precision machined for exact gear mesh and bearing preload Precision forged gears are offered in three ratios: 1:1, 1.1:1 and 1.43:1 Tapered roller bearings provide increased load capacity and bearing life 1" shaft made of high strength steel is standard • Serviced with 80W90 gear lubricant, run and leak tested before shipment • The 100 Series weighs 7/10 lbs. including 6 oz of lubricant 1 All ratings specified with the #1 shaft as the input *Torque measured in inch-lbs **Torque measured in N-m LIMITATIONS ON HORSEPOWER AND TORQUE RATINGS: The horsepower and torque ratings given here are generalizations. Different conditions for various applications may result in higher or lower horsepower capacities. Under certain conditions the maximum indicated rpm may be exceeded. For these reasons the ratings cannot be guaranteed for any application. Prototype testing should be conducted for each application before production. * Divide the horsepower rating by the service factor to obtain the design horsepower. ** AGMA Class 1 Service SUPERIOR GEARBOX