Mechanical ventilation
2Pages

Svea ventilation Mechanical ventilation Air inlets • Manufactured from insulating and freon-free polyurethane foam • Inlets with cooling position to obtain efficient cooling in the summer • Choose air inlet regarding to how the air is supplied • Fresh air can be supplied directly from the attic, through the walls or through a duct in the roof Svea Duct Well-proven inlet for most buildings High capacity wall inlet Flexible duct system with uniform distribution Cooling position • Network prepared control unit for mechanical ventilation • Suitable for stables with several departments • Humidity control • Shunt controlled heating • Balanced ventilation and zone regulation • Controls unlimited number of fans • Detached control unit for mechanical ventilation • Comfort control of temperature and air flow • For optimal animal comfort • Solution for smaller buildings PVX Mini • Integrated rpm-regulation and motor protection for speed controlled fan • Individually customized Control units There are high demands on precision and function on the control unit. This is where the indoor climate is regulated. Sveaverkens product range consists of three models of control units, costumized for different needs. For control of fan motors, normally one motorcontroller per fan is used. There are two main categories of motor-controllers: • PVS - for single-speed f

• Fans with low energy consumption for all animal buildings • Designed for a tough environment • Five differnt sizes: 0 40, 50, 60, 64, 82 cm • Choose capacity and mounting alternative • Wall fan, exhaust duct with fan and fan with expander mount for existing ducts as an option • Sveaverken have a long experience and great expertise of fans Product range guide In the product range guide, the capacity of the fans is given at 20 and 60 Pa negative static pressure. If the capacity at 60 Pa is used to design the exhaust system, a safety margin is obtained for the capacity reduction caused by...