swingfog® High Performance Fog Generators
8Pages

High Performance Fog Generators

At the end of the 1940’s, the first Swingfog thermal fogging machine was developed and built. Originally, the engine principle served for the propulsion of rockets. Further development of this technology resulted in the so-called Swingfire process. The idea has been successful in the market for more than 60 years, and the Swingfog brand name has become synonymous worldwide for thermal fog technology. Our present manufacturing programme is the result of our competence and experience, continuous development, as well as the permanent improvement of our products. In the early days: Mosquito...

SN 50, SN 81, SN 101 Swingfog SN 50 Portable machines, available with four types of spraying tank made of stainless steel or polyethylene. The fuel tank is made of stainless steel. All metal parts coming into contact with the chemical are also made from stainless steel. All types also available equipped with automatic chemical solution cut-off device. Swingfog SN 81, SN 81-PE, SN 81-20 PE, SN 81 Pump Stationary machines, available with a variaty of spraying tanks made of stainless steel or polyethylene. Fuel tanks made of stainless steel. The Swingfog SN 81 Pump is equipped with an electric...

Swingfog fogging machines run with regular grade gasoline (petrol) in accordance with the Swingfire principle. A fuel/air mixture is ignited in the combustion chamber and the deflagrations oscillate a column of gas in the resonator pipe between 80 and 110 times per second (depending on the type of machine). *For the SN 81 Pump and SN 101 Pump types, the fogging mixture is drawn by an electrically driven stainless steel pump. fuel/air mixture fogging mixture 4-5 msec At the end of the resonator, the fogging mixture is injected into the air stream emerging at high velocity, and is dispersed...

Pest control in a grain store Plant protection in plantations Wind direction Treatment of a potato store with a germination inhibitor Example of plant protection measures in large plantations with 4 operators and 4 units Swingfog SN 50

Typical droplet distribution generated by Swingfog Our advantage: Using water-based fogging mixtures, together with the high performance fogging tube, an excellent droplet spectrum is achieved, which is usually only possible with oil-based mixtures. Standard fogging tube for oil-based fogging mixtures High performance fogging tube for water-based fogging mixtures (optional accessory). Using this device for the application of water-based fogging mixtures, an excellent droplet spectrum is generated, which is almost identical to that of oil-based mixtures. The high performance fogging tube...

Automatic solution cut-off device for the fogging mixture by means of an electro-magnetic valve. Standard with Swingfog SN 81 Pump and with all models of Swingfog SN 101. Automatic, mechanically acting cut-off device for the fogging mixture. Standard with SN 81-20 PE. Optional for all models of SN 50 and for the Swingfog SN 81 and 81 PE types. Standard accessories supplied with every Swingfog machine (here example Swingfog SN 50) Fogging tube Spraying mixture funnel with strainer Fuel funnel with strainer Filter insert spraying tank Bag with tool kit and cleaning equipment Set of spares,...

Start of treatment before sunrise Fog distribution in wind direction Micro climate: – The sun rays cannot penetrate the fog layer and heat up the soil. – The fog stays in the plantation even after sunrise. Swingtec GmbH, Postfach 1322, 88307 Isny, Germany, Tel. +49 7562 708-0, Fax +49 7562 708-111, E-Mail: info@swingtec.de, www.swingtec.d